Cobra Electronics MR HH200 VP Batteries And Charger Jack, External Speaker/Microphone Jack

Models: MR HH200 VP

1 23
Download 23 pages 36.04 Kb
Page 15
Image 15

Wrist Strap, Belt Clip, Spkr/Mic Jack And Waterproof Pouch

Batteries And Charger Jack

Installation

Wrist Strap, Belt Clip, Spkr/Mic Jack And Waterproof Pouch

The radio is shipped with a Wrist Strap, Belt Clip and Waterproof Pouch in the package. The Speaker/Microphone Jack can be used with additional accessories. Contact your local Cobra® dealer or Cobra® directly for optional accessories.

Wrist Strap

Wrist Strap

Your radio comes with the Wrist Strap already attached. It can be easily removed if you choose

Installation

Batteries And Charger Jack

Your radio includes four (4) rechargeable NiCD (Nickel-Cadmium) Batteries (part No. NiCB) and a wall mount charger (part No. WWC) in the package. Your wall charger is capable of recharging one (1) radio with batteries installed in battery compartment.

You should fully charge the included rechargeable NiCD batteries before using your radio for the first time.

not to use it.

Belt Clip

Belt Clip

Use the Belt Clip to carry your radio around with you. Simply squeeze the clip and place it where you prefer.

External Speaker/Microphone Jack

Your radio can be fitted with an optional External Speaker/Microphone

(not included), freeing your hands for other tasks. Contact your local Cobra® dealer or Cobra® directly for optional accessories.

Speaker/Microphone Tab

To Attach The External Speaker/Microphone:

1.Open the speaker/microphone tab on top of the radio.

2.Insert the plug into the speaker/microphone jack.

Waterproof Pouch

Use the included Waterproof Pouch to not only keep your radio dry, but also dust and dirt free.

Waterproof Pouch

To Enclose The Radio In The Waterproof Pouch:

1.With the CobraMarinelogo facing up, slip radio, face up, into opening under Velcro® flap at the bottom of the waterproof pouch.

2.Turn pouch and radio over so that the CobraMarinelogo is facing down.

3.Roll bottom of pouch (between Velcro® pieces) towards upper piece of Velcro®.

4.Secure bottom piece of Velcro® to upper piece of Velcro®.

Remove Belt Clip

Remove Battery Cover

Insert Four (4) Batteries

Installing The Batteries

To Install Or Replace Batteries:

1.Remove belt clip by releasing belt clip latch and sliding clip down.

2.Pull down on the battery door latch to remove the battery compartment cover.

3.Insert the rechargeable NiCD batteries

(part No. NiCB) according to polarity markings.

4.Replace battery compartment cover and belt clip.

NOTE

Your radio can also be operated with four (4) standard AAA alkaline batteries. Always use high quality alkaline batteries. Position batteries according to polarity markings.

NOTE

Contact your local Cobra® dealer or Cobra® directly for optional accessories.

WARNING

Only the rechargeable NiCD batteries (part No. NiCB) can be recharged.

24 English

Nothing comes close to a Cobra® 25

Page 15
Image 15
Cobra Electronics MR HH200 VP owner manual Batteries And Charger Jack, External Speaker/Microphone Jack, Waterproof Pouch