Operating Your Radio
Scanning
SCAN Button
SCAN Icon
Channel Up/Down Buttons
32 English
Advanced Operation
Channel Scan Mode
During Channel Scan mode, the radio will rapidly switch from channel to channel through all the channels.
NOTE
The radio must be squelched for Channel Scan mode to function. See page 20 for Squelch procedure.
To Enter Channel Scan:
1.From Marine Standby mode, press the SCAN button. The radio will immediately begin to scan the entire channel map selected in the active channel map.
The SCAN icon will show on the LCD.
2.A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location.
3.Press the Channel Up/Down button to resume scanning the Channel Scan channels or to change the scan direction.
4.To EXIT Channel Scan mode, press the SCAN button again. The SCAN icon will disappear from the LCD and the radio will return to Marine Standby mode.
Operating Your Radio
Memory Location Scan
A
A
MEM/ESC Button
SCAN Button
Advanced Operation
Memory Location Scan Mode
During Memory Location Scan mode, the radio will rapidly scan through all
NOTE
The radio must be squelched for Memory Location Scan mode to function. See page 20 for Squelch procedure.
NOTE
If there are fewer than two (2) memory locations programmed in the radio, the Memory Location Scan option will not be available. To program at least two
(2) memory locations, see page 30.
To Enter Memory Location Scan:
1.From Marine Standby mode, press the MEM/ESC button.
2.Press the SCAN button. The radio will immediately begin to scan all
3.A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location.
4.Press the Channel Up/Down button to resume scanning the Memory Location Scan channels or to change the scan direction.
5.To EXIT Memory Location Scan mode, press the SCAN button again. The SCAN and MEM icons will disappear from the LCD and the radio will return to Marine Standby mode.
Nothing Comes Close to a Cobra® 33
