Mode Functions
Operation
Ten (10) Memory Locations
•
Your microTALK® radio has Ten (10) Memory Locations for storing your most frequently used channels and channel/privacy codes. These Memory Locations can be selected individually or can be scanned. (See page 16 for memory location scan.)
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
While setting a memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.
Mode Button | To Recall A Stored Memory Channel Location: |
Mode Button
To Program A Memory Location:
1. Press the Mode button until the Memory icon |
and the memory location flash on the display. |
1. Press the Mode button until the Memory |
icon and the memory location number flash |
on the display. |
Memory Icon
Channel Button
Lock Button
2. Press the Channel Up or Channel Down |
button to select the memory location |
(0 through 9). |
If a location has been programmed before, its associated channel/privacy code will be shown on the display.
3.Press the Lock button to enter a new memory location or edit an already programmed memory location. The channel numbers
will flash on the display.
4.Press the Channel Up or Channel Down button to select a channel (1 through 22).
5.Press the Lock button. The privacy code numbers will flash on the display.
Memory Icon
Channel Button
2.Press the Channel Up or Channel Down button to select a memory location
(0 through 9).
If a location has been programmed before, its associated channel/privacy code will be shown on the display.
3.Press the Talk button to return to Standby mode on the selected memory location.
Pressing the Lock button will put you in “program a memory location.”
While recalling a stored memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode
6.Press the Channel Up or Channel Down button to select a privacy code (0 to 38).
7.Choose one (1) of the following:
a.Press the Lock button to enter the channel/privacy code
in the selected memory location and return to the beginning of memory location options.
b.Press the Mode button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.
c.Press the Talk button to enter the channel/privacy code in the selected memory location and return to Standby mode on the selected memory location.
10 English
on the channel/privacy code displayed before you entered mode functions.
Nothing comes close to a Cobra™ 11
