Cobra Electronics PR3100DX To Change Call Settings, Setting vibrate + ring, Is displayed

Mode Functions

Operation

During Memory Location Scan (while receiving an incoming transmission), You Can Choose From The Following:

a. Press and hold the Talk button to communicate on that memory location. Your radio will remain on that memory location and return to Standby mode.

b. Press the Channel Up or Channel Down button to resume scanning memory locations.

If you press the Talk button while scanning and not within ten

(10)seconds of receiving a transmission, you will transmit on the memory location on which, during scanning, you last received

a transmission. This will return the radio to Standby mode.

If you do not press any button within ten (10) seconds, your radio will automatically resume scanning memory locations.

During Memory Location Scan (while not receiving a transmission), You Can Choose From The Following:

a. Press and hold the Talk button to communicate on the channel/privacy code that was displayed before you entered mode functions or memory location on which, during scanning, you last received a transmission. This will return the radio to Standby mode.

b. Press the Mode button to proceed to other functions.

c. Press the Lock button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the memory location on which, during scanning, you last received a transmission.

To reduce the number of memory locations being scanned, you may deprogram any unwanted locations. (See page 12 to de-program a memory location.)

Introduction Operation Customer Assistance Warranty

VibrAlert® And Call Tones

•

Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently, or both.

Mode Button	To Change Call Settings:
		VibrAlert®	+ Ring
	1. Press the Mode button until
	the Call Setting icon flashes
	on the display. The current
	setting (vibrate + ring,
Channel Button		VibrAlert®	Only
	vibrate only, or ring only)
	is displayed.
	2. Press the Channel Up or
	Channel Down button to
	change the call setting.	Ring Only

3.Choose one (1) of the following:

a.Press the Mode button to enter the new setting

and proceed to other functions.

b.Press the Lock button to enter the new setting and return to Standby mode.

Ten (10) Call Tone Settings

•

You can choose between ten (10) different Call Tone settings to transmit a unique call alert.

Mode Button	To Change A Call Tone Setting:
	1. Press the Mode button until the letter “C” and
	the current call tone Number (01 through 10)
	is displayed.

Call Tone Setting

Channel Button

2.Press the Channel Up or Channel Down button to hear the other call tone settings.

3.Choose one (1) of the following:

a.Press the Mode button to enter the new setting and proceed to other functions.

b.Press the Lock button to enter the new setting and return to Standby mode.

18 English

Nothing comes close to a Cobra™ 19