Cobra Electronics PR3100DX owner manual Through, To Recall a Stored Memory Channel Location

4. Press the Channel Up or Channel Down button to select a channel (1 through 22).

5. Press the Lock button. The privacy code numbers will flash on the display.

6. Press the Channel Up or Channel Down button to select a privacy code (0 to 38).

Lock Button

3. Press the Lock button to enter a new memory location or edit an already programmed memory location. The channel numbers

will flash on the display.

Channel Button

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

Memory Icon

1. Press the Mode button until the Memory icon and the memory location flash on the display.

2. Press the Channel Up or Channel Down button to select the memory location (0 through 9).

Mode Button

To Program A Memory Location:

Mode Functions

Operation

Ten (10) Memory Locations

•

Your microTALK® radio has Ten (10) Memory Locations for storing your most frequently used channels and channel/privacy codes. These Memory Locations can be selected individually or can be scanned. (See page 17 for memory location scan.)

Introduction Operation Customer Assistance Warranty

While setting a memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

7.Choose one (1) of the following:

a.Press the Lock button to enter the channel/privacy code

in the selected memory location and return to the beginning of memory location options.

b.Press the Mode button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.

c.Press the Talk button to enter the channel/privacy code in the selected memory location and return to Standby mode on the selected memory location.

Mode Button

Memory Icon

Channel Button

To Recall A Stored Memory Channel Location:

1.Press the Mode button until the Memory icon and the memory location number flash on the display.

2.Press the Channel Up or Channel Down button to select a memory location

(0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Talk button to return to Standby mode on the selected memory location.

Pressing the Lock button will put you in “program a memory location.”

While recalling a stored memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

10 English

Nothing comes close to a Cobra™ 11