|
|
|
|
|
|
|
|
|
| Introduction | Operation | Customer Assistance | Warranty |
|
|
| |
|
|
| Scan |
|
|
|
|
|
| Mode Button |
|
|
| • |
|
| |
|
|
| Your microTALK® radio can automatically scan |
|
| |||
main channels (1 through 22) or the privacy codes (00 through 38) within one (1) main channel.
To Scan Main Channels:
Scan Channels
1.Press the Mode button until the Scan icon and the main channel number flashes on the display.
2.Press the Channel Up or Channel Down button to begin scanning the main channels.
Channel Button
The radio ignores privacy codes while scanning main channels.
3.The Scan icon will continue to be displayed when Scan is On. Your radio will continue to scan all main channels and stop if an incoming transmission is detected. Your radio will remain on that channel for ten (10) seconds.
During this time, you can:
a.Press and hold the Talk button and communicate with others. Your radio will remain on that channel and return to Standby Mode.
b.Press the Channel Up or Channel Down button to resume scanning channels.
c.Press the Mode button to proceed to privacy code scanning (see page 12 for further details).
If you press the Talk button while scanning, and not within ten (10) seconds of receiving a transmission, you will transmit on the last channel you transmitted or received on.
If you do not press any button within ten (10) seconds, your radio will automatically resume scanning main channels.
Nothing comes close to a Cobra™ 11
