Mode Functions
Operation
If you press the Talk button while scanning, but more than
10 seconds after receiving a transmission, you will transmit on the memory location on which, during scanning, you last received a transmission. This will return the radio to Standby mode.
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
•
Roger Beep is an audible tone that your listener will hear when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.
If you do not press any button within 10 seconds, your radio will automatically resume scanning memory locations.
During memory location scan (while not receiving a transmission), you can choose from the following:
a. Press and hold the Talk button to communicate on the channel/privacy code that was displayed before you entered mode functions or memory location on which, during scanning, you last received a transmission.
b. Press the Mode/Lock button to proceed to other functions.
c. Press the Enter/Hi•Low button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the memory location on which, during scanning, you last received a transmission.
Mode/Lock Button
Roger Beep On
Channel Buttons
To turn roger beep on or off:
1.Press the Mode button until the Roger Beep icon flashes on the display. The current on or off setting is displayed.
2.Press the Channel Up or Channel Down button to select roger beep on or off.
3.Choose one of the following:
a.Press the Mode/Lock button to enter the new setting and proceed to other functions.
b.Press the Enter/Hi•Low button to enter the new setting and return to Standby mode.
To reduce the number of memory locations being scanned, you may
Keystroke Tones
•
With Keystroke Tones turned on, your radio will sound beeps each time you press a button or change a setting.
10 Call Tone Settings
•
You can choose from 10 different call tone settings to transmit a unique call alert.
Mode/Lock Button To change a call tone setting:
1.Press the Mode button until the letter “C” and the current call tone number (01 through 10) is displayed.
Mode/Lock Button
Keystroke Tones On
To change keystroke tones:
1. | Press the Mode/Lock button until the |
| Keystroke Tones icon flashes on the display. |
| The current on or off setting is displayed. |
2. | Press the Channel Up or Channel Down |
| button to turn keystroke tones on or off. |
3. Choose one of the following: | |
Call Tone Setting
Channel Buttons
2.Press the Channel Up or Channel Down button to hear the other call tone settings.
3.Choose one of the following:
a.Press the Mode/Lock button to enter the new setting and proceed to other functions.
b.Press the Enter/Hi•Low button to enter the new setting and return to Standby mode.
Channel Buttons
a. Press the Mode/Lock button to enter the |
new setting and return to Standby mode. |
b. Press the Enter/Hi•Low button to enter the |
new setting and return to Standby mode. |
|
|
|
|
18 English | Nothing Comes Close to a Cobra® 19 | ||
