Lexmark XM3100 Setting up Scan to Network, Click Settings Apps Apps Management Multi Send, UseTo

Setting up and using the home screen applications 26

1Open a Web browser, and then type the printer IP address in the address field.

Note: View the printer IP address on the printer home screen. The printer IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

2Click Settings > Apps > Apps Management > Multi Send.

3From the Profiles section, click Add, and then customize the settings.

Notes:

•See the mouse‑over help beside each field for a description of the setting.

•If you select FTP or Share Folder as a destination, then make sure the location settings of the destination are correct. Type the correct IP address of the host computer where the specified destination is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 21.

4Click Apply.

To use the application, touch Multi Send on the printer home screen, and then follow the instructions on the printer display.

Setting up Scan to Network

Note: A later version of this User's Guide may contain a direct link to the Administrator’s Guide of this application. To check for updates of this User's Guide, go to http://support.lexmark.com.

UseTo

Scan a document and send it to a shared network folder. You can define up to 30 unique folder destinations.

Notes:

• The printer must have permission to write to the destinations. From the computer where the destination is specified, use sharing, security, and firewall settings to allow the printer at least a write access. For help, see the documentation that came with your operating system.

• The Scan to Network icon appears only when one or more destinations are defined.

1 Open a Web browser, and then type the printer IP address in the address field.

Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

2Click Settings > Apps > Apps Management > Scan to Network.

3Specify the destinations, and then customize the settings.

Notes:

•See the mouse-over help beside some of the fields for a description of the setting.

•To make sure the location settings of the destination are correct, type the correct IP address of the host computer where the specified destination is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 21.

•Make sure the printer has access rights to the folder where the specified destination is located.

4Click Apply.