Lexmark XM3100 manual Print Settings menu items and their descriptions, Copies

Understanding the printer menus				197
	Use		To
	Mirror Image		Create a mirror image of the original document.
	Off		Note: Off is the factory default setting.
	On
	Negative Image		Create a negative image of the original document.
	Off		Note: Off is the factory default setting.
	On
	Shadow Detail		Adjust the amount of shadow detail visible on a scanned image.
	‑4 to 4		Note: 0 is the factory default setting.
	Scan edge to edge		Specify whether the original document is scanned edge-to-edge.
	Off		Note: Off is the factory default setting.
	On
	Sharpness		Adjust the amount of sharpness on a scanned image.
	1–5		Note: 3 is the factory default setting.
	Temperature		Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer
	‑4 to 4		output than the default while “warm” values generate a redder output than the
			default.
Print Settings
Print Settings menu items and their descriptions
	Copies	Specify a default number of copies for each print job.
	1–999	Note: 1 is the factory default setting.
	Paper Source	Set a default paper source for all print jobs.
	Tray [x]	Note: Tray 1 is the factory default setting.
	MP Feeder
	Manual Paper
	Manual Envelope
	Collate	Stack the pages of a print job in sequence when printing multiple copies.
	Off (1,1,1,2,2,2)	Note: On is the factory default setting.
	On (1,2,1,2,1,2)
	Sides (Duplex)	Specify whether prints are on one side or on both sides of the page.
	1 sided	Note: “1 sided” is the factory default setting.
	2 sided
	Staple	Specify whether prints are stapled.
	Off	Notes:

On

•Off is the factory default setting.

•This menu appears only when a staple finisher is installed.