Lexmark XM3100 manual Using the Embedded Web Server, Configured model

Learning about the printer 14

Configured model

1

3

2

1 Optional 250‑sheet tray

2Optional 550‑sheet tray

3 Optional stapler

Using the Embedded Web Server

Note: This feature is available only in network printers or printers connected to print servers.

If the printer is installed on a network, then you can use the Embedded Web Server to do the following:

•View the virtual display of the printer control panel.

•Check the status of the printer supplies.

•Configure supply notifications.

•Configure printer settings.

•Configure network settings.

•View reports.

To access the Embedded Web Server for your printer:

1Obtain the printer IP address:

•From the TCP/IP section in the Network/Ports menu

•By printing a network setup page or menu settings page, and then finding the TCP/IP section

Notes:

–An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

–If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Open a Web browser, and then type the printer IP address in the address field.