Lexmark XM3100 manual Job Accounting menu, Understanding the printer menus 203

Understanding the printer menus 203

Use

Brightness

‑6 to 6

Contrast

0–5

To

Adjust the printed output either by lightening or darkening it. You can conserve toner by lightening the output.

Note: 0 is the factory default setting.

Adjust the contrast of printed objects.

Note: 0 is the factory default setting.

Job Accounting menu

Note: This menu item appears only when a formatted, working printer hard disk is installed. Make sure the printer hard disk is not read/write‑ or write‑protected.

Use	To
Job Accounting Log	Determine and set if the printer creates a log of the print jobs it receives.
Off	Note: Off is the factory default setting.
On
Job Accounting Utilities	Print and delete log files or export them to a flash drive.
Accounting Log Frequency	Determine and set how often a log file is created.
Weekly	Note: Monthly is the factory default setting.
Monthly
Log Action at End of Frequency	Determine and set how the printer responds when the frequency threshold expires.
None	Note: None is the factory default setting.
E‑mail Current Log
E‑mail & Delete Current Log
Post Current Log
Post & Delete Current Log
Disk Near Full Level	Specify the maximum size of the log file before the printer executes the Disk Near
Off	Full Action.
1–99	Note: 5 is the factory default setting.
Disk Near Full Action	Determine and set how the printer responds when the printer hard disk is nearly full.
None	Notes:
E‑mail Current Log
	• None is the factory default setting.
E‑mail & Delete Current Log
	• The value defined in Disk Near Full Level determines when this action is
E‑mail & Delete Oldest Log
Post Current Log	triggered.
Post & Delete Current Log
Post & Delete Oldest Log
Delete Current Log
Delete Oldest Log
Delete All Logs
Delete All But Current