Lexmark XM3100 manual Attaching cables, Windows 7 or earlier, Click Update Now ‑ Ask Printer

Additional printer setup 49

In Windows 7 or earlier

aClick or click Start, and then click Run.

bIn the Start Search or Run dialog, type control printers.

cPress Enter, or click OK.

2Depending on your device, do either of the following:

•Press and hold the printer you want to update.

•Right‑click the printer you want to update.

3From the menu that appears, do either of the following:

•For Windows 7 or later, select Printer properties.

•For earlier versions, select Properties.

4Click the Configuration tab.

5Do either of the following:

•Click Update Now ‑ Ask Printer.

•Under Configuration Options, manually add any installed hardware options.

6Click Apply.

For Macintosh users

1From the Apple menu, navigate to either of the following:

•System Preferences > Print & Scan > select your printer > Options & Supplies > Driver

•System Preferences > Print & Fax > select your printer > Options & Supplies > Driver

2Add any installed hardware options, and then click OK.

Attaching cables

CAUTION—POTENTIAL INJURY: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning storm.

Connect the printer to the computer using a USB cable or to the network using an Ethernet cable. Make sure to match the following:

•The USB symbol on the cable with the USB symbol on the printer

•The appropriate Ethernet cable with the Ethernet port

Warning—Potential Damage: Do not touch the USB cable, any network adapter, or the printer in the area shown while actively printing or scanning. Loss of data or a malfunction can occur.