Nortel Networks 1750 manual Installing and replacing DIMMs

Chapter 3 Option card and DIMM installation 57

8If you want to install the VPN Router 1750 in an equipment rack, mount it in the rack.

9Set the VPN Router 1750 on the rack-mount shelf in the rack.

10Insert one of the panhead screws through the bottom hole on each side of the shelf into the hole in the rack, and tighten the screws.

11Replace the front bezel.

12Hold the bezel by the two handles, and push it onto the chassis.

13Use a screwdriver to tighten the two screws that secure the bezel to the chassis; see the following figure.

Press here

CS260005E

Installing and replacing DIMMs

The VPN Router 1750 has two slots for DIMMs. Unless you order additional memory, Nortel ships the VPN Router 1750 with one 128 Megabit (MB) DIMM installed. You can install a second 128 MB DIMM to upgrade memory in the gateway.

Caution: If you use a memory module not purchased from Nortel, you can render your warranty or your service contract void.

Nortel VPN Router Installation — VPN Router 1750