Nortel Networks 1750 manual M0-SIGNAL Ground

Appendix A Technical specifications 93

Table 32 V.35 cable pinouts (continued)

			Special-
Standard-wired		Pair number	wired end
end 28-pin male	Signal name	and conductor	34-pin male	Notes
26	M0<-SIGNAL GROUND	Pair 12B	B	Wires 12B, 13A, and
				14B connect to pin B
				in the 34-pin
				connector.
27	M1<-SIGNAL GROUND	Pair 13A	B	Wires 12B, 13A, and
				14B connect to pin B
				in the 34-pin
				connector.
28	M2	Pair 13B	No conn	The term No conn
				means the wire does
				not connect to a pin in
				the 34-pin connector.
1	SHIELD	Pair 14A	A	At each end, the cable
				shield and connector
				shell must connect
				respectively to pin A of
				the 34-pin connector
				and pin 1 of the
				standard 28-pin
				connector.
				Do not connect Shield
				to Signal Ground
				because these are
				separate signals.
7	SIGNAL GROUND	Pair 14B	B	Wires 12B, 13A, and
				14B connect to pin B
				in the 34-pin
				connector.
				Do not connect Shield
				to Signal Ground
				because these are
				separate signals.

Nortel VPN Router Installation — VPN Router 1750