Nortel Networks 1750 manual PCI slots, Power, 10/100, switch, Ethernet

Chapter 1 Cables and power 23

For information about the connectors and cable pinouts, see Appendix A, “Technical specifications,” on page 69.

“Rear view of the Nortel VPN Router 1750” on page 23 shows the back of the VPN Router 1750. All interface cables and the power cord attach to the rear of the gateway.

Figure 1 Rear view of the Nortel VPN Router 1750

4 PCI slots

VPN Router 1750
100 - 240 V~			LAN0 LAN1
5 - 3 A
	Power
60 - 50 Hz
		Serial Port
			1	2	3	4
AC	Power	Serial port	10/100
receptacle	switch		Ethernet
			LAN ports

11424EA

Connect the interface cables to the VPN Router 1750 in the following order:

1Connect the 10/100BASE-TX RJ-45 cables to the built-in 10/100BASE-TX Ethernet LAN ports on the gateway.

2If you plan to connect a terminal or PC to the gateway, connect the serial cable that ships with the VPN Router 1750 to the serial port.

3Connect all other cables to the ports on the installed interface cards.

If you ordered optional interface cards, connect the cables for these interfaces to the ports.

Nortel VPN Router Installation — VPN Router 1750