Nortel Networks 1750 manual Replace the top cover on the chassis

60 Chapter 3 Option card and DIMM installation

6Replace the top cover on the chassis.

7Hold the cover at an angle, and slide it onto the chassis.

8Insert the four screws that secure the cover to the chassis, and use a screwdriver to tighten the screws.

9If you want to install the VPN Router 1750 in an equipment rack, mount it in the rack.

10Set the VPN Router 1750 on the rack-mount shelf in the rack.

11Insert one of the panhead screws through the bottom hole on each side of the shelf into the hole in the rack, and tighten the screws.

12Replace the front bezel.

13Hold the bezel by the two handles, and push it onto the chassis.

14Use the screwdriver to tighten the two screws that secure the bezel to the chassis.

NN46110-316 03.01