Lexmark XM3100 manual Setup, Scanning 139

Scanning 139

Page Setup

This option lets you change the following settings:

•Sides (Duplex)—This specifies if the original document is printed on only one side or on both sides of the paper.

•Orientation—This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings to match the orientation.

•Binding—This specifies if the original document is bound on the long‑edge or short‑edge side.

Scan Preview

This option lets you view the first page of the image before it is included in the e-mail. When the first page is scanned, the scanning is paused and a preview image appears.

Note: This option appears only when a working printer hard disk is installed.

Using the advanced options

Select from the following settings:

•Advanced Imaging—This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you scan the document.

•Custom Job—This combines multiple scanning jobs into a single job.

•Edge Erase—This removes smudges or marks around the edges of a document. You can choose to remove an equal area around all four sides of the paper, or pick a particular edge. Edge Erase erases whatever is within the area selected, leaving nothing on that portion of the scan.

•Transmission Log—This prints the transmission log or transmission error log.

•Multifeed Sensor—This detects when the ADF picks more than one sheet of paper at a time, and then shows an error message.

Note: This option is supported only in select printer models.