Lexmark XM3100 Understanding the basic functions of the scanner, Using the ADF and scanner glass

Learning about the printer 15

3Press Enter.

The Embedded Web Server page appears.

Understanding the basic functions of the scanner

•Make quick copies or set the printer to perform specific copy jobs.

•Send a fax using the printer control panel.

•Send a fax to multiple fax destinations at the same time.

•Scan documents and send them to your computer, an e-mail address, or an FTP destination.

•Scan documents and send them to another printer (PDF through an FTP).

Using the ADF and scanner glass

Automatic document feeder (ADF)

Scanner glass

Use the ADF for multiple‑page documents including two-sided (duplex) pages.

Use the scanner glass for single‑page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Using the ADF

When using the ADF:

•Load the document into the ADF tray faceup, short edge first.

•Load up to 50 sheets of plain paper into the ADF tray.

•Scan sizes from 105 x 148 mm (4.1 x 5.8 inches) wide to 216 x 368 mm (8.5 x 14.5 inches) long.

•Scan media weights from 52 to 120 g/m2 (14–32 lb).

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

Using the scanner glass

When using the scanner glass:

•Place a document facedown on the scanner glass in the corner with the green arrow.

•Scan or copy documents up to 216 x 355.6 mm (8.5 x 14 inches) long.

•Copy books up to 25.3 mm (1 inch) thick.