Lexmark XM3100 manual Clearing jams 240, Jam access area Printer control panel message What to do

Clearing jams					240
				1
			9		2
					3
					4
			8		5
			7	6
		Jam access area	Printer control panel message		What to do
	1	Automatic	[x]‑page jam, open ADF to clear		Remove all paper from the ADF tray, and then remove the
		document feeder	jam. [28y.xx]		jammed paper.
		(ADF)
	2	Standard bin	[x]‑page jam, clear standard		Remove the jammed paper.
			bin. [20y.xx]
	3	Front door	[x]‑page jam, open front		Open the front door, then remove the toner cartridge and
			door. [20y.xx]		imaging unit, and then the jammed paper.
	4	Multipurpose	[x]‑page jam, clear manual		Remove all paper from the multipurpose feeder, and then
		feeder	feeder. [25y.xx]		remove the jammed paper.
	5	Tray 1	[x]‑page jam, remove tray 1 to		Pull out tray 1 completely, then push the front duplex flap
			clear duplex. [23y.xx]		down, and then remove the jammed paper.
					Note: You may need to open the rear door to clear
					some 23y.xx paper jams.
	6	Tray [x]	[x]‑page jam, open tray		Pull the indicated tray out, and then remove the jammed
			[x]. [24y.xx]		paper.
	7	Rear door	[x]‑page jam, open rear		Open the rear door, and then remove the jammed paper.
			door. [20y.xx]
	8	Finisher rear door	[x]-page jam, remove all pages		• Open the finisher rear door, and then remove the
			from the finisher’s accumulator.		jammed paper.
			Leave paper in bin [45y.xx]		• Open the trap door, and then remove the jammed
					paper.
9		Finisher output bin	[x]-page jam, remove all pages		• Move the left tamper arm to the left and the right
			from the output bin. Leave paper		tamper arm to the right, and then remove the jammed
			in bin [45y.xx]		paper from the finisher bin.
					• Open the finisher rear door and the trap door, and
					then remove any jammed pages.