Lexmark XM3100 manual Smtp Setup menu, Understanding the printer menus 160

Understanding the printer menus 160

SMTP Setup menu

Use	To
Primary SMTP Gateway	Specify SMTP server gateway and port information.
	Note: 25 is the default SMTP gateway port.
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout	Specify the amount of time in seconds before the server stops trying to
5–30	send an e‑mail.
	Note: 30 is the factory default setting.
Reply Address	Specify a reply address of up to 128 characters in the e-mail sent by the
	printer.
Use SSL	Set the printer to use SSL for increased security when connecting to the
Disabled	SMTP server.
Negotiate	Notes:
Required	• Disabled is the factory default setting.
	• When the Negotiate setting is used, the SMTP server determines if
	SSL will be used.
SMTP Server Authentication	Specify the type of user authentication required for scan to e‑mail
No authentication required	privileges.
Login/Plain	Note: “No authentication required” is the factory default setting.
CRAM‑MD5
Digest‑MD5
NTLM
Kerberos 5
Device‑Initiated E‑mail	Specify what credentials will be used when communicating to the SMTP
None	server.
Use Device SMTP Credentials	Notes:
User‑Initiated E‑mail	• None is the factory default setting for Device‑Initiated E‑mail and
None	User‑Initiated E‑mail.
Use Device SMTP Credentials	• “Device Userid” and “Device password” are used to log in to the
Use Session User ID and Password	SMTP server when Use Device SMTP Credentials is selected.
Use Session E‑mail address and Password
Prompt user
Device Userid
Device password
Kerberos 5 Realm
NTLM Domain