Lexmark XM3100 manual PCL Emul menu, Understanding the printer menus 206

Understanding the printer menus		206
	Use	To
	Lock PS Startup Mode	Disable the SysStart file.
	On	Note: Off is the factory default setting.
	Off
	Font Priority	Establish the font search order.
	Resident	Notes:

Flash/Disk

•Resident is the factory default setting.

•This menu item is available only when a formatted flash memory option card or printer hard disk is installed and operating properly.

•Make sure the flash memory option or printer hard disk is not read/write‑, write‑, or password‑protected.

•Job Buffer Size must not be set to 100%.

PCL Emul menu

Use	To
Font Source	Specify the set of fonts used by the Font Name menu.
Resident	Notes:
Disk
	• “Resident” is the factory default setting. Resident shows the factory
Download
	default set of fonts downloaded in the RAM.
Flash
	• “Flash” and “Disk” settings show all fonts resident in that option.
All
	• The flash option must be properly formatted and cannot be read/write‑,
	write‑, or password‑protected.
	• “Download” shows all the fonts downloaded in the RAM.
	• “All” shows all fonts available to any option.
Font Name	Identify a specific font and the option where it is stored.
Courier 10	Note: Courier 10 is the factory default setting. Courier 10 shows the font
	name, font ID, and the storage location in the printer. The font source
	abbreviation is R for Resident, F for Flash, K for Disk, and D for Download.
Symbol Set	Specify the symbol set for each font name.
10U PC‑8	Notes:
12U PC‑850	• 10U PC‑8 is the US factory default setting. 12U PC‑850 is the international
	factory default setting.
	• A symbol set is a set of alphabetic and numeric characters, punctuation,
	and special symbols. Symbol sets support the different languages or
	specific programs such as math symbols for scientific text. Only the
	supported symbol sets are shown.