Lexmark XM3100 manual Preparing to set up the printer on a wireless network

Additional printer setup 53

–This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to:

System Preferences > Print & Fax b Click +, and then navigate to:

AppleTalk > select your printer > Add

Preparing to set up the printer on a wireless network

Notes:

•Make sure your wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter.

•Make sure your access point (wireless router) is turned on and is working properly.

Make sure you have the following information before setting up the printer on a wireless network:

•SSID—The SSID is also referred to as the network name.

•Wireless Mode (or Network Mode)—The mode is either infrastructure or ad hoc.

•Channel (for ad hoc networks)—The channel defaults to automatic for infrastructure networks.

Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select.

•Security Method—There are four basic options for Security Method:

–WEP key

If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key.

–WPA or WPA2 preshared key or passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network.

–802.1X–RADIUS

If you are installing the printer on an 802.1X network, then you may need the following:

•Authentication type

•Inner authentication type

•802.1X user name and password

•Certificates

–No security

If your wireless network does not use any type of security, then you will not have any security information.

Note: We do not recommend using an unsecured wireless network.

Notes:

–If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point, or contact your system support person.