Lexmark XM3100 manual Print Settings, Setup menu, Understanding the printer menus 199

Understanding the printer menus 199

Print Settings

Setup menu

Use	To
Printer Language	Set the printer language.
PCL Emulation	Notes:
PS Emulation
	• PCL Emulation is the factory default setting.
	• Setting a printer language as the default does not prevent a
	software program from sending print jobs that use another
	printer language.
Job Waiting	Specify that print jobs be removed from the print queue if they
On	require unavailable printer options or custom settings.
Off	Print jobs removed from the print queue are stored in a separate
	print queue, so other jobs print normally. When the missing
	information or options are obtained, the stored jobs print.
	Notes:
	• Off is the factory default setting.
	• This menu setting appears only when a formatted, working
	printer hard disk is installed. This requirement ensures that
	stored jobs are not deleted if the printer loses power.
Print Area	Set the logical and physical printable area.
Normal	Notes:
Whole Page
	• Normal is the factory default setting. When attempting to
	print data in the non‑printable area defined by the Normal
	setting, the printer clips the image at the boundary.
	• Whole Page allows the image to be moved into the
	non‑printable area defined by the Normal setting, but the
	printer will clip the image at the Normal setting boundary.
	This affects only pages printed using a PCL 5e interpreter.
	This has no effect on pages printed using the PCL XL or
	PostScript interpreter.
Download Target	Set the storage location for downloads.
RAM	Notes:
Flash
	• RAM is the factory default setting. Storing downloads in the
Disk
	RAM is temporary.
	• Storing downloads in flash memory or on a printer hard disk
	places them in permanent storage. Downloads remain in
	flash memory or on the printer hard disk even when the
	printer is turned off.
	• This menu setting appears only when a formatted, working
	flash drive or printer hard disk is installed.