MS-7360 Mainboard
Re-Call VGA BIOS From S3
When ACPI Standby State is set to [S3], users can select the options in this field. Selecting [Enabled] allows BIOS to call VGABIOS to initialize the VGA card when system wakes up (resumes) from S3 sleep state. The system resume time is short- ened when you disable the function, but system will need an VGA driver to initialize the VGA card. Therefore, if the VGA driver of the card does not support the initializa- tion feature, the display may work abnormally or not function after resuming from S3.
Suspend Time Out (Minute)
If system activity is not detected for the length of time specified in this field, all devices except CPU will be shut off.
Power Button Function
This feature sets the function of the power button. Settings are:
[Power Off] | The power button functions as normal power off button. |
[Suspend] | When you press the power button, the computer enters the |
| suspend/sleep mode, but if the button is pressed for more |
| than four seconds, the computer is turned off. |
Restore On AC Power Loss
This item specifies whether your system will reboot after a power failure or interrupt occurs. Settings are:
[Off]
[On]
[Last State]
Wakeup Event Setup
Press <Enter> and the following
Resume From S3 By USB Device
The item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep state.
Resume From S3 by PS/2 Keybo
This setting determines whether the system will be awakened from what power saving modes when input signal of the PS/2 keyboard is detected.
