Lexmark XM3100 manual Quality menu, Understanding the printer menus 202

Understanding the printer menus		202
	Use		To
	Staple Job		Specify whether printed output is stapled.
	Off		Notes:
	On
			• Off is the factory default setting.
			• This menu item appears only when a supported staple finisher is installed.
	Run Stapler Test		Print a report that confirms that the staple finisher is functioning properly.
			Note: This menu item appears only when a supported staple finisher is installed.
Quality menu
	Use	To
	Print Resolution	Specify the printed output resolution in dots per inch.
	300 dpi	Note: 600 dpi is the factory default setting.
	600 dpi
	1200 dpi
	1200 Image Q
	2400 Image Q
	Pixel Boost	Enable more pixels to print in clusters for clarity, in order to enhance images horizontally
	Off	or vertically, or to enhance fonts.
	Fonts	Note: Off is the factory default setting.
	Horizontally
	Vertically
	Both directions
	Isolated
	Toner Darkness	Lighten or darken the printed output.
	1–10	Notes:
			• 8 is the factory default setting.
			• Selecting a smaller number can help conserve toner.
	Enhance Fine Lines	Enable a print mode preferable for files such as architectural drawings, maps, electrical
	On	circuit diagrams, and flow charts.
	Off	Notes:
			• Off is the factory default setting.
			• You can set this option from the printer software. For Windows users, click File >
			Print, and then click Properties, Preferences, Options, or Setup. For Macintosh
			users, choose File > Print, and then adjust the settings from the Print dialog and
			pop‑up menus.
			• To set this option using the Embedded Web Server, type the network printer IP
			address in the Web browser address field.
	Gray Correction	Automatically adjust the contrast enhancement applied to images.
	Auto	Note: Auto is the factory default setting.
	Off