Lexmark XM3100 manual Understanding the printer menus 173, Error Recovery

Understanding the printer menus		173
	Use	To
	Timeouts	Set the amount of time in seconds the printer waits before
	Screen Timeout	returning the printer display to Ready state.
	15–300	Note: 30 is the factory default setting.
	Timeouts	Show a message that lets you reset the screen timeout timer
	Prolong Screen Timeout	instead of returning to the home screen.
	On	Note: Off is the factory default setting.
	Off
	Timeouts	Set the amount of time in seconds the printer waits to receive an
	Print Timeout	end‑of‑job message before canceling the remainder of the print
	Disabled	job.
	1–255	Notes:
		• 90 is the factory default setting.
		• When the timer expires, any partially printed page still in the
		printer is printed, and then the printer checks to see if any
		new print jobs are waiting.
		• Print Timeout is available only when using PCL emulation.
		This setting has no effect on PostScript emulation print jobs.
	Timeouts	Set the amount of time in seconds the printer waits for additional
	Wait Timeout	data before canceling a print job.
	Disabled	Notes:
	15–65535	• 40 is the factory default setting.
		• Wait Timeout is available only when the printer is using
		PostScript emulation. This setting has no effect on PCL
		emulation print jobs.
	Timeouts	Set the amount of time the printer waits for user intervention
	Job Hold Timeout	before it holds jobs that require unavailable resources and
	5–255	continues to print other jobs in the print queue.
		Notes:
		• 30 is the factory default setting.
		• This menu item appears only when a formatted, working
		printer hard disk is installed.
	Error Recovery	Automatically reboot the printer.
	Auto Reboot	Note: “Reboot when idle” is the factory default setting.
	Reboot when idle
	Reboot always
	Reboot never
	Error Recovery	Determine the number of automatic reboots the printer can
	Max Auto Reboots	perform.
	1–20	Note: 5 is the factory default setting.