NETWORK Menu
NETWORK Menu
Consult with your network administrator before connecting to an existing access point on your network. Incorrect network settings on this projector may cause trouble on the network.
Select “NETWORK” from the main menu to access the following functions.
Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table.
| /#)' | +2 #&&4'5 | |
+ | 02 6 | 57$0'6/#5- | |
| 2 | '(#7.6)#6 9#; | |
#7& |
| &+(('4 0%' | |
| +1 | '#0&6+/' | |
5%4''012 | G5*16 | ||
0'6914- | +0(14/#6+10 | ||
'#5;/'07 | 5'48+%' |
NOTE • The factory default setting for DHCP is “TURN ON”. There is no need to set
up [DHCP], [IP ADDRESS], [SUBNET MASK] or [DEFAULT GATEWAY] if your network
has DHCP enabled.
•If you are not utilizing SNTP, then you must set the DATE AND TIME during the initial installation. Please refer to the item DATE AND TIME on the following list.
Item | Description |
|
| DHCP TURN ON/TURN OFF: |
|
DHCP (Dynamic | Use the ▲/▼ buttons to turn DHCP on/off | 67401(( |
Host Configura- | TURN ON TURN OFF |
|
tion Protocol) | Select TURN OFF when the network does not have DHCP en- | |
| abled. |
|
| Entering the IP ADDRESS : |
|
| Use the ▲/▼/◄/► buttons to enter the IP | 192. 168. 1. 254 |
IP ADDRESS | ADDRESS. This function can only be used | IP ADDRESS |
when DHCP is set to “TURN OFF”. |
|
•The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP AD- DRESS on the same network.
| Entering the SUBNET MASK : |
|
|
|
| |
SUBNET MASK | Use the ▲/▼/◄/► buttons to enter the | 255. 255. 255. | 0 | |||
same SUBNET MASK used by your PC. | ||||||
| SUBNET MASK | |||||
| This function can only be used when DHCP |
| ||||
|
|
|
|
| ||
| is set to “TURN OFF”. |
|
|
|
| |
| Entering the DEFAULT GATEWAY : |
|
|
|
| |
DEFAULT GATE- | Use the ▲/▼/◄/► buttons to enter the DE- | 0. | 0. | 0. | 0 | |
FAULT GATEWAY (a node on a computor net- | ||||||
|
|
|
| |||
WAY | work that serves as an access point to another | DEFAULT GATEWAY | ||||
| network) address.This function can only be |
|
|
|
| |
| used when DHCP is set to “TURN OFF”. |
|
|
|
|
(continued on next page)
ViewSonic | PJ1158 | 53 |