ViewSonic PJ1158 Using the MyScreen PASSWORD Function, OPTION Menu continued, Item, Description

OPTION Menu

OPTION Menu (continued)

Item	Description
	1.3 If you have forgotten your PASSWORD
	1.3-1 Follow the procedure in 1.1-1 to display the
	ENTER PASSWORD BOX.
	1.3-2 While the ENTER PASSWORD BOX is	
	displayed, press and hold the RESET button
	on the remote control for about 3 seconds or
	press and hold the INPUT and ► buttons on
	the projector for about 3 seconds.	Inquiring Code
	The 10 digit Inquiring Code will be displayed.	(PASSWORD)
	NOTE: If there is no key input for about 55 seconds
	while the Inquiring Code is displayed the menu will
	close. If necessary repeat the process from 1.3-1.
	1.3-3 Contact ViewSonic with the 10 digit Inquiring Code. Your PASSWORD
	will be sent after your user registration information is confirmed.

	2. Using the MyScreen PASSWORD Function
	The MyScreen PASSWORD function can be used to prohibit access to the
	MyScreen function and prevent the currently registered MyScreen image
	from being overwritten.
SECURITY	2.1 Turning on the MyScreen PASSWORD
	Function
	2.1-1 Use the ▲/▼ buttons on the SECURITY
	menu to select MyScreen PASSWORD and	MyScreen PASSWORD
	press the ► button to display the MyScreen
	PASSWORD on/off menu.		on/off menu
	2.2 Setting the PASSWORD
	2.2-1 Display the MyScreen on/off menu using the
	procedure in 2.1-1.
	2.2-2 Use the ▲/▼ buttons on the MyScreen PASS-
	WORD on/off menu to select TURN ON.
	The ENTER PASSWORD BOX (small) will be dis-
		37+6		0':6
	played.
		ENTER PASSWORD
	2.2-3 Use the ▲/▼/◄/► buttons to enter the PASS-		BOX (small)
	WORD. Move the cursor to the right side of
	the ENTER PASSWORD BOX (small) and
	press the ► button to display the CHECK
	PASSWORD BOX, enter the same PASS-
		37+6		0':6
	WORD again.	CHECK PASSWORD
		BOX

(continued on next page)

ViewSonic PJ1158 48