OPTION Menu
OPTION Menu (continued)
Item
Description
SECURITY
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.
•Transition Detector alarm shown below might appear on screen, if the pro- jector has been moved or
•Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.
•Keystone adjustment feature has been prohibited as long as the Transition Detector function is ON.
4.1 Turning On the Transition Detector Function
select Transition Detector and press the ► or the ENTER button to display the Transition Detector on/off menu. Select TURN ON and the current angle and mirror setting will be recorded.
NOTE: This feature may not function properly if the projector is not in a stable position when TURN ON is selected.
If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch was turned off.
4.2 Setting the Transition Detector PASSWORD
37+6 0':6
ENTER PASSWORD
BOX (small)
37+6
20 seconds, please make note of the PASS- WORD during this time.
Pressing the ENTER button on the remote control or the INPUT button on the projector will return to the
Transition Detector on/off menu.
• Please do not forget your Transition Detector PASSWORD.
(continued on next page)
ViewSonic | PJ1158 | 51 |