Command Control via the Network
Command Control Settings (Continued)
When the authentication setting is enabled, the following settings are required.
7)Click [Security Settings] on the main menu.
8)Click [Network Control] and enter the desired authentication password. * See Note1.
9)Click the [Apply] button to save the settings. * See Note2.
NOTE1 • The Authentication Password will be the same for [Network Control Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and [Image Transfer Port (Port: 9716)].
NOTE2 • The new configuration settings are activated after restarting the network. Restart the network when any configuration settings are changed. The network connection can be restarted using [Network Restart] on the main menu.
ViewSonic | PJ1158 | 89 |
