ViewSonic PJ1158 manual Picture Menu, Gamma

PICTURE Menu

PICTURE Menu

From the PICTURE menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it according to the following table.

	/#)				#56
	+02	6		)#/			&'(#7.6
	#7&	2		%1.146'/2			/+&
	5%4''			/;6+06/'/14;		5#8' 
	1260''#5;+194/'07-			5*#420'55%6+8'+4+			6740 1((
							

Item	Description
BRIGHTNESS	Using the ▲/▼ buttons adjusts the brightness.
	Light ó Dark
CONTRAST	Using the ▲/▼ buttons adjusts the contrast.
	Strong ó Weak
	Using the ▲/▼ buttons switches the gamma mode.
	#1 DEFAULT ó#1 CUSTOM ó #2 DEFAULT ó #2 CUSTOM ó #3 DEFAULT

#5 CUSTOM ó #5 DEFAULT ó #4 CUSTOM ó #4 DEFAULT ó #3 CUSTOM

	To adjust CUSTOM
	Selecting a mode whose name includes			ENTER :
		1 2 3 4 5 6 7			8
	CUSTOM and then pressing the ► button
	or the ENTER button displays a dialog to aid
	you in adjusting the mode.
	This function is useful when you want to
		+0 +0 +0 +0 +0 +0 +0			+0
	change the brightness of particular tones.		GAMMA [CUSTOM 1]
	Choose an item using the ◄/► buttons, and
GAMMA	adjust the level using the ▲/▼ buttons.
	You can display a test pattern for checking the effect of your adjust-
	ment by pressing the ENTER button.
	Each time you press the ENTER button, the pattern changes as
	below.

No pattern ð Gray scale of 9 steps

Ramp  Gray scale of 15 steps

The eight equalizing bars correspond to eight tone levels of the test pattern except the darkest in the left end. If you want to adjust the 2nd tone from left end on the test pattern (Gray scale of 9 steps), use the equalizing adjustment bar “1”. The darkest tone at the left end of the test pattern cannot be controlled with any of equalizing adjustment bar.

•When this function is performed, lines or other distortion may ap- pear.

(continued on next page)

ViewSonic PJ1158 26