Sanyo WTC500L owner manual How to Operate the On-Screen Menu, Remote Control

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual.

1	Press the MENU button on the top control or the
	remote control to display the On-Screen Menu.
2	Use the Point 7 8 buttons to select a Menu icon. Use
	the Point ed buttons to select an item in the selected
	menu.
3	Press the SELECT button to show the item data. Use
	the Point 7 8 buttons to adjust the values.

To close the On-Screen Menu, press the MENU button again.

✔Note:

•The selected item is not active until the SELECT button is pressed.

Top Control

MENU button

POINT buttons

SELECT button

Remote Control

POINT buttons

SELECT button

MENU button

On-Screen Menu	Menu icon
Menu bar	Pointer
	(red frame )

Pointer (red frame )

Press the Point ed buttons to move the pointer.

Item

SELECT

button

Press the SELECT button here to display previous items.

Press the SELECT button here to display next items.

Item data

Press the Point 7 8 buttons to adjust the value.

Quit

Exit this menu.

26