Input Selection
Input Source Selection
Menu Operation | Input Menu | |
1 | Press the MENU button to display the |
|
| Menu. Use the Point 7 8 buttons to move the red |
|
| frame pointer to the Input Menu icon. |
|
2 | Use the Point ed buttons to move the red arrow |
|
| pointer to the desired input and then press the |
|
| SELECT button. The signal format menu appears. |
|
3 | Use the Point ed buttons to select the desired signal |
|
| format and then press the SELECT button. |
|
INPUT 1
RGB (PC analog)
RGB (Scart)
HDMI
When the RGB PC (analog) signal is connected
When the RGB PC (scart) signal is connected
When the HDMI signal is connected.
INPUT 2
RGB
Video
Component*
When the RGB PC signal is connected.
When the video signal is connected.
When the component signal is connected.
*If the projector cannot reproduce proper video image, select a system manually (see “Video System Selection” on page 36)
*”Component” can accept the component signal and the analog RGB signal. Some unsupported RGB signals may be detected to component signals. In this case, please set to “RGB”manually.
INPUT 3
Video*
When the video signal is connected.
When the
*If the projector cannot reproduce proper video image, select a system manually (see “Video System Selection” on page 36).
35
