Sanyo WTC500L Manual PC Adjustment, Computer Adjustment, Fine sync, Total dots, Horizontal, Clamp

Computer Adjustment

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 7 8 buttons to move the red
	frame pointer to the PC Adjust Menu icon.
2	Use the Point ed buttons to move the red frame
	pointer to the desired item and then press the SELECT

button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value.

Fine sync

Use the Point 7 8 buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31).

Total dots

Use the Point 7 8 buttons to adjust the number of total dots in one horizontal period to match your PC image.

Horizontal

Use the Point 7 8 buttons to adjust the horizontal picture position.

Vertical

Use the Point 7 8 buttons to adjust the vertical picture position.

Current mode

Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer.

Clamp

Use the Point 7 8 buttons to adjust the clamp level. When the image has dark bars, try this adjustment.

PC Adjust Menu

PC Adjust Menu icon

Move the red frame pointer to the desired item and press the SELECT button.

Status (Stored/Free) of the selected Mode.

Selected Mode

Use the Point 7 8 buttons to adjust the value.

Press the SELECT button here to adjust other items.

Press the SELECT button at Current mode to show the information of the connected computer.

39