Setting
Lamp control
Lamp control
This function allows you to change brightness of the screen.
Auto 1 | The brightness according to the input signal |
| (between Normal and Eco mode). |
Auto 2 | The brightness according to the input signal |
| (between High and Eco mode). |
High | Brighter than the Normal mode. |
Normal | Normal brightness |
Eco 1 | Lower brightness and Fan speed decrease. |
| Lower brightness reduces the lamp power |
| consumption and extends the lamp life. |
Eco 2 | Lower brightness and Fan speed increase. |
| Lower brightness reduces the lamp power |
| consumption and extends the lamp life. It is |
| recommended to use Eco 2 when using the |
| projector continuously over a long period of |
| time. |
Lamp life control
Select the lamp operation when the total lighting time of a lamp exceeds the recommended total hours of use.
Mode 1 | A lamp can be turned on even after exceeding |
| the recommended total hours of use. |
Mode 2 . . . . A lamp is not turned on after exceeding the recommended total hours of use.
Filter control
You can replace the filter with this function. Press the SELECT button at Filter control to display a confirmation box. To replace, press the SELECT button at “YES” and the electrically operated filter starts to scroll.
✔Note:
•The fan noise becomes louder in Eco 2 than in Eco 1. Select the suitable mode for the used environment.
✔Note:
•A lamp is switched to the lamp which is not exceeding the recommended total hours of use next time when you turn on the projector, even when the Mode 1 is selected.
✔Note:
•Filter replacement icon and “Please wait...” message appear on the screen when the filter is being scrolled.
•The filter cannot be rewound.
•When the filter is replaced, the total accumulated time of the filter use is automatically set to 0.
54
