Ricoh AP2610N setup guide Quick Setup Using the NIB Setup Tool Wizard, Click Wizard and click OK

Quick Setup Using the NIB Setup Tool Wizard

Quick Setup Using the NIB Setup Tool Wizard

With the NIB Setup Tool, you can easily set up a NetWare printing environment.

Reference

For more information about installing the NIB Setup Tool, see p.49 “Installing the NIB Setup Tool”.

You can select [Wizard] or [Property Sheet] as an installation method.

When you configure the Network Interface Board for the first time, use the Wiz- ard method.

If you want to use the Property Sheet method, see p.54 “NetWare 3.x - Advanced Settings” or p.60 “NetWare 4.x, 5/5.1 - Advanced Settings”.

Note
❒ This section assumes that NetWare is functional and that the necessary envi-
ronment for NetWare Print Services is available.	5
❒ If you configure the Network Interface Board in a NetWare environment us-

ing the NIB Setup Tool, you should install the client software released from Novell in the following cases.

•Windows 95/98/Me in NDS mode configuration

•Windows NT 4.0 in NDS mode configuration

•Windows NT 4.0 in Bindery mode configuration

•Windows 2000 in NDS mode configuration

•Windows 2000 in Bindery mode configuration

A Log on to the Netware file server or the NDS tree as an Admin or Admin equivalent.

B Run the NIB Setup Tool.

Reference

See p.50 “Running the NIB Setup Tool” .

C Click [Wizard] and click [OK].

The [NIB Setup Tool - Network board list] dialog box of the Network Interface Board appears.

D Click [IPX protocol].

E Click to select the IPX address of the Network Interface Board you are con- figuring, and then click [Next >].

Note

❒If you do not know which Network Interface Board you are configuring, print a network configuration page to check the MAC address (Network address).

51