Ricoh AP2610N setup guide Configuring the Network Interface Board Settings

Appendix

Configuring the Network Interface Board Settings

A Start the Web browser.

B Point your browser at the URL or IP address of the printer (e.g. ht- tp://XXX.XXX.XXX.XXX where the Xs are the number of the IP address).

The status of the printer you chose appears on the Web browser.

C Click [Configuration].

The dialog box for entering the password and user name is displayed.

D Enter your user name and password, and then click [OK].

To use the factory default account, enter no user name and type "password" for the password.

E Click the item you want to configure, and then make all the settings.

The following items can be configured:

❖[General]

Configure the general settings for the machine here.

❖[TCP/IP]

	Configure the TCP/IP-related settings for the Network Interface Board,
7
	802.11b Interface Unit, and 1394 Interface Unit.

❖[SNMP]

Configure the appropriate community settings here. Up to 10 types of community names can be registered.

❖[NetWare]

Configure the settings for printing in a NetWare environment here.

❖[AppleTalk]

Configure the Network Interface Board or 802.11b Interface Unit settings related to the AppleTalk protocol.

❖[NetBEUI]

Configure the Network Interface Board or 802.11b Interface Unit settings related to the NetBEUI protocol here.

❖[IEEE 1394]

Configure the 1394 Interface Unit settings related to IP over 1394 and SCSI print (SBP-2).

Limitation

❒This page is displayed when the 1394 Interface Unit is installed.

78