Ricoh AP2610N Spool Printing, Confirm or delete the spooled job from a Web browser, 152

Appendix

Spool Printing

With spool printing, the whole data of a print job is saved in the Printer Hard Disk before printing. To use this function, set it from the menu. See p.124 “Sys- tem Menu”.

Important

❒Do not turn off the printer or the computer when a print job is being spooled and the Data In indicator is blinking. If you do, the print job will remain in the Printer Hard Disk and be printed when the printer is turned on.

Limitation

❒Spool printing does not appear unless the optional Hard Disk Drive is in- stalled.

❒Data that has been received in the protocol other than LPD or IPP cannot be spooled.

❒Up to 50 jobs (approximately 500 MB) can be spooled at a time.

❒When spool printing is on, the size of a single print job cannot exceed 500 MB.

❒When sending spooled print jobs from more than one computer at the same time, up to five LPR jobs and one IPP job can be spooled. Jobs exceeding the maximum number cannot be spooled. Wait until the number of spooled print jobs falls below the maximum.

7 Note

❒ When "On" is selected, the first print will take time.

❖Confirm or delete the spooled job from a Web browser.

The spooled job can be seen or deleted from a Web browser. Start a Web browser, and then input the IP address of the printer for URL to show the top page. Click [Admin Info.], and then click [Spool Printing]. Select the file, check for delete, input the password, and then click the delete button. (The default password is "password".)

152