Ricoh AP2610N setup guide Adjusting the Registration of the Trays

Troubleshooting

C Press {Enter #}.

Image Density:

(-3 +3) 0

D Press {U} or {T} to set the image density value.

Note

❒To maintain a darker image un- der high volume printing condi- tions, we highly recommended that you select 3 from the con- trol panel.

❒You can adjust the image densi-

ty in seven steps from -3 to +3.

5 Increasing the value makes the printouts darker and decreasing the value makes the printouts lighter.

E Press {Enter #}.

F Press {On Line}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

"Ready" appears on the panel dis- play.

Adjusting the Registration of the Trays

You can adjust the registration of each tray. The vertical adjustment is used for all trays. Normally, you need not update the registration. But when the optional Paper Feed Unit or the Duplex Unit is installed, updating the registration is useful in some case.

The following procedure describes how to adjust Tray 1. You can use the same procedure to adjust the other tray as well.

A Press {Menu}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

"Menu" appears on the panel dis- play.

Ready

98