Ricoh AP2610N setup guide Setting Up the Printer Driver

Using SmartNetMonitor for Client

C After the confirmation message appears, click [Yes].

UninstallShield removes all of the components of SmartNetMonitor for Cli- ent.

D After a confirmation message appears, click [Yes].

E Acknowledge the [Remove Shared File?] dialog box.

F When the uninstallation is complete, click [OK].

Setting Up the Printer Driver
The following procedure allows you to configure the printer port to use Smart-
NetMonitor for Client.	4
Preparation

The target printer must be turned on before starting the installation process.

A Install the printer driver of the printer you want to use.

B From the [Printers] window, click the icon of the printer. On the [File] menu, click [Properties].

C Click the [Ports] tab and click [Add Port].

D Click [SmartNetMonitor] from the list, and then click [New Port...]. The [Select Printer] dialog box appears .

The displayed items are as follows:

Model Name: The model name of the printer.

Name: The name of the Network Interface Board.

Comment: Additional information about the Network Interface Board.

Address: The IP address of the printer.

E Select the printer.

TCP/IP

A Click the printer you want to use, and then click [OK].

Note

❒Printers that respond to an IP broadcast from the computer will be dis- played. To print to a printer not listed here, click [Specify Address], and then type the IP address or host name.

43