Ricoh AP2610N setup guide Setting Up the Printer Driver

Using SmartNetMonitor for Client

Uninstalling SmartNetMonitor for Client

Preparation

Before uninstalling SmartNetMonitor for Client, make sure that:

•The port settings dialog box is closed.

•No printer is using the SmartNetMonitor for Client port as a printer port.

• You have performed login with the same user authority as that used to in- 2

stall SmartNetMonitor for Client.

A Open [Control Panel], and then double-click the [Add/Remove Programs] icon.

B Click the [Change or Remove Programs] tab, click [SmartNetMonitor for Client], and then click [Change/Remove].

C After the confirmation message appears, click [Yes].

UninstallShield removes all of the components of SmartNetMonitor for Client.

D After the confirmation message appears, click [Yes].

E Acknowledge the [Remove Shared File?] dialog box.

F When the uninstallation is complete, click [OK].

Setting Up the Printer Driver

The following procedure allows you to configure the printer port to use Smart- NetMonitor for Client.

Preparation

The target printer must be turned on before starting the installation process.

A Install the printer driver for the printer you want to use.

B From the [Printers] window, click the icon of the printer. On the [File] menu, click [Properties].

C Click the [Ports] tab and click [Add Port].

D Click [SmartNetMonitor for Client] in the [Available port types:] box, and then click [New Port].

The [Select Printer] dialog box appears and printers on the network are browsed. The displayed items are as follows:

Model Name: The model name of the printer.

Name: The name of Network Interface Board.

Comment: Additional information about Network Interface Board.

Address: The IP address of the printer.

19