Appendix

C To avoid making your hands dirty with toner from the transfer roller, wear the gloves included in the maintenance kit.

D Hold the lock levers (“$” parts), and pull them.

ZCEM200J

E Hold the green parts of the roller on both sides, and remove the roller from the printer as shown in the illustration.

7

ZCEM210J

F Insert the new transfer roller on the socket with the gear of the roller positioned on the left.

ZCEM220J

Important

Do not insert the roller on the back of the socket, or the printer might be damaged.

Insert the metallic part of the roller on the socket. If you insert the sponge part of the roller, the roller might be damaged.

G Push down the green parts of both sides of the printer until it clicks as shown in the illustration.

ZCEM221J

Note

When the transfer roller is set, the transfer roller cover will re- turn to its original position au- tomatically.

H Holding the grips of the toner car- tridge, insert it into the printer until it stops.

ZGDT120J

148

Page 250
Image 250
Ricoh AP2610N setup guide 148