Ricoh AP2610N Confirming the Connection, Make sure the LED of the Ieee 802.11b card is lit

Using the IEEE 802.11b (Wireless LAN)

Confirming the Connection

A Make sure the LED of the IEEE 802.11b card is lit.

1

2

ZGDH600J

1.If the IEEE 802.11b card is on, it lights in orange. If the IEEE 802.11b (wireless LAN) is not selected, it does not light, even if the printer power is on.

2.If it is connected properly to a net- work, the LED lights in green with

infrastructure mode, it is not con-	7
nected to a network. Check the net-

work environment.

B Use a Web browser to check that the printer is connected properly. See p.76 “Configuring the Net- work Interface Board with a Web Browser”.

C Print the configuration page to verify the settings.

For information about how to print the configuration page, see the Set- up Guide.

91