Ricoh AP2610N setup guide User Code, Duplex Unit

Using PostScript 3

User Code

Use this to set a user code for print logging.

	Enter a user code using up to eight digits. A user code identifies a group of users
1
	and allows you to check the number of sheets printed under each code with
	SmartNetMonitor for Admin.

The following table shows the tabs or menus where you can select this function.

Windows 95/98/Me	[User Code] on the [Statistics] tab.
Windows 2000/Windows XP	[User Code] on the [Job/ Log] tab in the Printing Preferenc-
	es Properties.
Windows NT 4.0	[User Code] on the [Job/ Log] tab in the Document De-
	faults dialog box.
Macintosh	[User Code] on [Job Log] in the print dialog box.

Reference

For more information about using SmartNetMonitor for Admin, see the Help file.

Options

See “Setting Up Options” in the Setup Guide for the installation method appro- priate to your printing environment.

The following table shows the tabs or menus where you can select this function.

Windows 95/98/Me	[Option] on the [Accessories] tab.
Windows 2000/Windows XP	[Installable Options] on the [Device Setting] tab.
Windows NT 4.0	[Option] on the [Device Setting] tab.
Macintosh	[Chooser] on the Apple Menu.

❖Tray 2

•You can select the tray with the following menu for Paper Feed Unit Type

2600:

Paper Source⇒ p.8

❖Tray 3

•You can select the other tray with the following menu for an additional Pa-

per Feed Unit Type 2600: Paper Source⇒ p.8

❖Duplex Unit

•You can use the following function with AD410: “Duplex Printing” ⇒ p.6

10