Registration Prt. Test Sheet, Prt. Test Sheet Tray | Ricoh AP2610N

Cleaning and Adjusting the Printer

B Press {U} or {T} to display the "Maintenance" menu, and then press {Enter #}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

Maintenance:

Image Density

C Press {U} or {T} to display "Reg- istration", and then press {Enter

#}.

The following message appears on the panel display.

Registration:

Prt. Test Sheet

D Print the test sheet to preview the settings you have made.

ZCEX480J

A After confirming that "Prt. Test

Sheet" is on the panel display, press {Enter #}.

The following message appears on the panel display.

Prt. Test Sheet

Tray 1

B Press {U} or {T} to display the tray you want to adjust, and then press {Enter #} to print the test sheet. Wait for a few sec- onds.

The following message appears on the panel display.

Printing...

E Adjust the registration by con- firming the position of the print- ed image of the test sheet.

The following is an example of ad- justing the margin on the test sheet equally.

A Press {U} or {T} to display "Adjustment", and then press {Enter #}.

The following message appears on the panel display.

Adjustment:

Horiz.: Tray 1

B Press {U} or {T} to display the tray you want to adjust, and then press {Enter #}.

The following message appears on the panel display.

5

Horiz.: Tray: (-4.0 +4.0) 0

99

Image 201

Ricoh AP2610N Registration Prt. Test Sheet, Prt. Test Sheet Tray, Printing, Adjustment Horiz. Tray, Horiz. Tray -4.0 +4.0

Contents

Setup Guide Means Power ON. b means Power OFF Setup Guide Page Trademarks Safety During Operation Safety Information Iii Positions of Labels and Hallmarks for Rwarning and RcautionPage Energy Saver mode SpecificationsEnergy Star Program Recycled Paper Manuals for This Printer Manuals for This Printer How to Read This Manual SymbolsVii Table of Contents Installing the PostScript Printer Driver Installing the Rpcs Printer DriverInstalling the Printer Driver Using USB Installing the Printer Driver Using IeeePage Major Specifications Features of This PrinterTime Saving Compact Body Printer Drivers for This Printer PCL printer driversRpcs printer driver Adobe PostScript Printer Drivers and PPD files Software and Utilities Included on the CD SmartNetMonitor for AdminAgfa Monotype Font Manager SmartNetMonitor for Client Viewing the Contents of the CD-ROM Guide to This Printer MainframeExterior Power Switch Front Cover Release Button Power CordOutput Tray Standard Tray Upper Cover Interior Control Panel Job Reset keyForm Feed key Menu key Enter # key Escape key Option List Installing Options Available Options Paper Feed Unit Type 2600 Tray 2 or TrayEnvelope Feeder Type Basic model Printer Interior Network standard model Printer Interior Memory Unit TypeB 64MB Hard Disk Drive Type802.11b Interface Unit Type a Memory Unit TypeB 64MB Attach the interface cable to the printer Paper Feed Unit Type Reference Envelope Feeder Type Use a coin to remove the two screws Memory Unit TypeB 64MBPull out the handle of the control- ler board Pull the handle and slide the con- troller board out If the Duplex Unit is not at- tached, go to step N Installing Options Network Interface Board Type Installing the Network Interface Board Fasten the Network Interface Board to the controller board If the Duplex Unit is not at- tached, go to step O Turn off the power switch Loop the network interface cable Connecting the Network Interface Cable to the Network Interface Unit Type Installing the 1394 Interface Unit Attach the 1394 Interface Unit to the controller board Fasten the 1394 Interface Unit to the controller board Power supply Connecting the 1394 InterfaceRequired cable Bus 802.11b Interface Unit Type a Attach the 802.11b Interface Unit Ing the Configuration HDD Error Initialize ? Hard Disk Drive TypeFasten the Hard Disk Drive Ready HDD Initialize Finish OKPress Enter # to format the Hard Disk Drive Press On Line Remove the rear cover in the hor- izontal direction AD410 Duplex Unit After installing the last option that Remove the upper cover of the printer Bin Shift Sort Tray Type Slide the upper tray into the 1-bin Shift Sort Tray CS380 Mailbox CS380 Mailbox Installing Options Setting Name Value Ethernet Configuration Network Setup IP Address Host Interface Network SetupNetwork Setup Active Protocol Menu Host Interface Network Boot *None Network Setup Network BootPress U or T to display Network Boot IP Address 192.02k.033.044 Network Setup LAN Type Network Setup Frame Type NWFrame Type NW *Auto LAN Type *Ethernet Host Interface Ieee 1394 Setup Ieee 1394 ConfigurationIeee 1394 Setup IP Address1394 Ieee 1394 Setup IP over Ieee 1394 Setup Scsi print IP Address1394 192.02k.033.044Scsi print *Active Ready Ieee 802.11b Comm. Mode Ieee 802.11b Wireless LAN ConfigurationHost Interface Ieee 802.11b Press U or T to display Ieee 802.11b Address Ieee 802.11b ChannelSubnet Mask Gateway Address Configuring the Printer for the Network Connection Installation Method Select Quick Install Quick Install Follow the instructions on the screen Click Install Installing the PCL 6/5e Printer Driver Installing the PCL 6/5e Printer DriverSelect PCL/RPCS Printer Drivers Setting Up Options Installing the Rpcs Printer Driver Installing the Rpcs Printer Driver Installing the Rpcs Printer Driver Windows 95/98/Me Installing the PostScript Printer Driver Installing the PostScript Printer DriverInstalling the printer driver Click Next Check Local Printer and then click Next Select PostScript 3 Printer Driver Add Printer Wizard starts Setting up options Click the Device Settings tab Windows NT 4.0 Installing the PostScript Printer Driver Bidirectional transmission When connecting with a parallel cable When connecting with the network When connecting with IeeeWhen connecting with USB Setting up the PPD file Macintosh Installing the PostScript 3 Printer Driver Close the Chooser dialog box Click Configure Windows 98/Me Installing the Printer Driver Using USB Installing the Printer Driver Using USBCheck Specify a location, and then click Browse Click Finish Click Change in USB Printer Selection Macintosh-Creating a Desktop Printer iconClick Create Enter the printer name, and then click Save Printing with Scsi Print Installing the Printer Driver Using Ieee Click Open Click OK Click Browse Windows XP Inactivating the Device Printing with IP over Found New Hardware Wizard dialog box, and then click Next Select SmartNetMonitor for Client/Admin Installing the SmartNetMonitor for Client/Admin Select Agfa Monotype Font Manager Installing the Agfa Monotype Font Manager Using Adobe PageMaker Version 6.0 or Index Rpcs UE USA G074 Means Power ON. b means Power OFF UE USA G074-8637 Printer Reference Page Trademarks Printer Reference this manual Setup Guide How to Read This Manual Table of Contents Maintenance Menu 114 Error & Status Messages on the Control PanelSample Print Locked Print Specifications 157 Replacing Parts 143Consumables 164 Information about Installed Software 165 System Menu 124 Windows 95/98/Me Accessing the Printer Properties PCL 6/5e Accessing the Printer PropertiesChanging the default printer settings Making printer settings from an application Changing the default printer settings Printer Properties Windows 2000/Windows XP Accessing the Printer Properties Click Print to start printing Select the printer you want to use in the Select Printer box On the File menu, click Document Defaults Windows NT 4.0 Accessing the Printer Properties Click OK to start printing Rpcs Accessing the Printer Properties On the File menu, click Printing Preferences Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application Make any settings you require and click Apply Click OK PostScript Setting Up for Printing Printing Preferences Properties appears Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application Making paper settings from an application Macintosh Setting Up for PrintingSetting up for printing from an application On the File menu, click Page Setup Select the name of the job you want to cancel Canceling a Print JobOn the Document menu, click Cancel Printing Press Job Reset on the control panel Double-click the printers icon on the desktop Macintosh Canceling a Print Job Uninstalling the PCL 6/5e Printer Driver Windows 95/98/Me Uninstalling the PCL 6/5e Printer DriverClick Yes to uninstall the printer driver Windows NT 4.0 Uninstalling the PCL 6/5e Printer Driver Windows 95/98/Me Uninstalling the Rpcs Printer Driver Uninstalling the Rpcs Printer Driver Close all applications that are currently running Windows NT 4.0 Uninstalling the Rpcs Printer Driver Windows 95/98/Me Uninstalling the PostScript Printer Driver Uninstalling the PostScript Printer Driver Macintosh Uninstalling the PostScript Printer Driver Windows NT 4.0 Uninstalling the PostScript Printer Driver Paper and Other Media Supported by This Printer Paper Types and SizesThis manual On the panel display Paper feed direction MmSize Input Paper Sizes Metric version Input Paper Sizes Inch version 10.12 ⋅ Supported paper weight Maximum number Sheets plain paper *1 Paper weight and number of sheets to be set Output Paper Sizes Metric version Output Paper Sizes Inch version 16K 68 ⋅ 101/2 101/2 ⋅ Loading Paper Paper RecommendationsStoring Paper Types of Paper and Other Media Plain paper Adhesive labels OHP transparenciesEnvelopes Metric version Inch version Paper not supported by this printer Printable Area Loading Paper and Other Media Loading Paper in the Paper TrayLoad paper into the tray with the print side down Slide the catches inwards to unlock the tray Changing the paper size Return the catches to their orig- inal positions Slide the tray until it stops Adjust the side guides to the pa- per width Loading Paper in the Bypass TrayOpen the Bypass Tray Paper Input Bypass Size Menu Paper InputBypass Size *11 x Bypass Size 2 x Custom Size Horiz Bypass Size Custom SizeCustom Size Vert Menu Paper Input Ready Paper Input Paper Type Setting the Bypass Tray Paper TypePaper Type Bypass Tray Bypass Tray Thick Paper Loading Paper in the Optional Paper Tray Loading Envelopes Loading envelopes onto the Bypass TrayLoad paper into the paper tray with the print side down Press U or T to display Paper Input menu Slide the side guides against the edge of the envelope stack Press U or T to select the envelope type you want to use Loading envelopes into the Envelope Feeder Unit Push the bottom plate down until it locks into place Tray Paper Size Tray Paper Input Tray Paper SizePress U or T to display Tray Paper Size Press U or T to display Tray Ready message appears on the control panel From an application, select the menu command to print Sample PrintPrinting a Sample Print File Select Action Print File Sample Print 0856 ABCD1234Menu Sample Print Qty Press # to Print Processing Deleting a Sample Print FileABCD1234 Press# to Delete Deleted Sample Print Error Files Checking the Error LogError Files 0652 ABCD1234 Press T or U to display Error Files Ready Click OK After making all desired settings, click OK Password box, type a pass- word of four digitsLocked Print Printing a Locked Print File Password *2 PasswordInvalid Password Try Again Menu Locked Print Press T or U to display the Locked Print menu ABCD1234 Press # to Print Press T or U to display De- lete File Select Action Delete File Locked Print Error Files Messages/Second messages Description Solution Error & Status Messages on the Control Panel Troubleshooting See 1394 Interface Unit Type NV-RAM Error & Status Messages on the Control Panel Enter # Messages/Second messages Description Solution Messages/Second messages Description Solution Printer current status Getting Printer Information over the NetworkTelnet Messages Description Comments Messages Description Comments Messages Description Comments Messages Description Comments Printer configuration Input Tray NameName Description Paper Size Description Input Tray Paper Size Output Tray Name Input Tray StatusOutput Tray Status Status Description Printer Does Not Print Possible Cause Solutions Network Connection Terface cable ERS\ UTILITY\1394\ Status Possible Causes, Descriptions, and Solutions Other Printing Problems On from the Maintenance menu Other Printing Problems Removing Misfed Paper When Remove Misfeed Paper Tray Appears When Remove Misfeed Internal Path/Open Front Cover Appears Close the front cover When Remove Misfeed Paper Exit Cover Appears Remove the misfed paper Open the paper exit coverClose the paper exit cover until it clicks Remove the rear cover in a hor Izontal direction Insert the fusing unit until it stops While holding the tab, remove the misfed paperClose the rear cover Close the rear cover of the Du- plex Unit When Remove Misfeed Duplex Unit Appears Pull the Duplex Unit out Close the cover of the Duplex UnitPrinter until it stops, and remove Misfed paper Close the cover of the Mailbox Open the cover of the MailboxOpen the upper tray cover Close the upper tray cover Replacing the Toner Cartridge Be sure to put the toner cartridge on a stable, flat surface ZGDH130J Cleaning the Friction Pad Cleaning and Adjusting the Printer Move the printer to the edge of a stable table or desk Cleaning the Paper Feed Roller ZGDM120J Cleaning the Registration Roller Maintenance Image Density Adjusting the Image Density Press U or T to set the image density value Adjusting the Registration of the Trays Registration Prt. Test Sheet Adjustment Horiz. TrayPrt. Test Sheet Tray Printing Press U or T to set the dig- it of the registration value mm 100 Menu Chart 101Category Function menu 102 103 104 Accessing the Main Menu 105 Paper Input Parameters Paper Input MenuTray 106 107 Tray 1, Tray 2, Tray Paper Input Tray Priority Changing the Paper Input MenuTray Priority *Tray 108 109 List/Test Print Menu Printing a ConfigurationList/Test Print Parameters 110 Menu List/Test Print List/Test Print Config.111 Press T or U to display the List/Test Print menu Interpreting the Configuration Error Log MaintenancePaper Input System 114 Maintenance Menu Adjustment Maintenance Menu ParametersPrt. Test Sheet 115 116 Maintenance Menu Protect Changing the Maintenance MenuMenu Protect *Off Protecting the menus 118 Canceling the protection Maintenance HDD Format Menu MaintenanceHDD Format Press# to Start Completed Restart Printer Displaying the Signal Strength Maintenance WL.LAN SignalPress T or U to display the Maintenance menu Press T or U to display WL.LAN Signal WL.LAN Signal Good 100% Fair 50% Poor 30% Unavailable 18% 121Press Escape 122 Resetting the Ieee 802.11b Wireless LAN Settings WL.LAN Defaults Reset-Defaults? Maintenance WL.LAN DefaultsDefaults reset Press T or U to display WL.LAN Defaults 124 System Menu 125 126 127 Tiff Changing the System Menu System MisfeedRecoveryMenu System System Energy Saver Press U or T to display E. Saver Timer Energy Saver Saver TimerEnergy Saver Saver On/Off Energy Saver *30 minutes Host Interface Menu Host Interface Parameters130 Menu Description Network Setup IP Address131 Frame Type NW Network BootActive Protocol Ethernet Subnet Mask1394 IP Address1394IP over Scsi print Comm.Mode WEP SettingsChannel Trans. Speed Press U or T to display I/O Timeout Host Interface TimeoutChanging the Host Interface Menu 135 136 Timeout *15 seconds PCL Menu PCL Parameters137 138 PCL Menu Orientation Changing the PCL MenuOrientation Portrait 139 140 Changing the Language Menu Language MenuMenu Language 141 142 Language English 143 Replacing Parts Checking the contents of the box Maintenance KIT Type Replacing the Friction Pad Check the contents of the box for the following itemsPreparing to replace the parts 145 Insert the new friction pad in the paper tray Replacing the Paper Feed Rollers 147 Replacing the Transfer Roller 148 Replacing the Fusing Unit 149Remove the rear cover in a hor- izontal direction Pull the fusing unit out Replace the new fusing unit into the printer150 Collate Collate and Shift CollateShift Collate 151 Spool Printing Confirm or delete the spooled job from a Web browser152 Setting of the Frame Priority Memory Capacity and Paper Size153 154 Setting of the Font Priority Moving the Printer Moving and Transporting the PrinterMoving the printer in the short distance 155 156 Removing the Duplex Unit Specifications Power Source Paper WeightPower Consumption Dimensions *1 Paper Capacity Warm-up TimePaper Output Capacity Memory Envelope Feeder Type Dimensions W⋅D⋅H Paper Feed Unit Type Dimensions W⋅D⋅HAD410 Duplex Unit Dimensions W⋅D⋅H Options CS380 Mailbox Dimensions W ⋅ D ⋅ H Bin Shift Sort Tray Type Dimensions W ⋅ D ⋅ HStack Capacity Hard Disk Drive Type Storage Capacity Formatted Interface Connector Number of PinsMemory Unit TypeB 64MB Module Type Memory Type 802.11b Interface Unit TypeA R-WL11 Transmission Spec Transmission ModeProtocol Data Transfer Speed Consumables Maintenance KitToner Cartridge 164 Information about Installed Software Expat165 166 NetBSD 167 Authors Name List 168 169 170 Copyright UE USA G073-8617 Network Printing Guide Page Manuals for This Machine How to Read This Manual Features Interface supported protocols Windows 95/98/Me, Windows 2000/Windows XP, Windows NT Setting Up the Machine on a Network NetWare Configuring the machine as a print server Macintosh Configuring the machine as a remote printer Ad hoc mode Printing using the Ieee 802.11b Interface Infrastructure mode Printing using the Ieee 1394 Interface Configuring Protocols Configuring Windows 95/98/MeUsing SmartNetMonitor for Client Setting Up a Client Computer Installing the NIB Setup Tool Configuring Windows NTNetWare 4.x, 5/5.1 Advanced Settings Configuring Macintosh Monitoring and Configuring the Printer Using SmartNetMonitor for AdminUsing the Ieee 802.11b Wireless LAN Remote Maintenance by telnet Xiv Configuring Windows 95/98/Me Printing without a Print ServerPrinting with a Windows 2000 or Windows NT Print Server Configuring TCP/IP and IPP for Printing Configuring ProtocolsConfiguring the machine Command Prompt Configuring NetBEUI for Printing Configuring a Windows 95/98/Me computerConfiguration tab Configuring a Windows 95/98/Me computer SmartNetMonitor for Client features Using SmartNetMonitor for Client Uninstalling SmartNetMonitor for Client Installing SmartNetMonitor for ClientDeleting the port Click OK to close the printer properties Setting Up the Printer Driver Select the printerClick the printer you want to use, and then click OK Click IPP Click NetBEUI Changing Port Settings Install the printer driver as a local printer Setting Up a Client Computer Printers connected to the network are displayed Windows 95/98/Me Configuration Printing with a Standard TCP/IP Port Configuring Windows Printing with a LPR Port Configuring a Windows 2000 computer Configuring the Protocols Configuring NetBEUI for Printing Using SmartNetMonitor for Client Click Close to close the Printer Properties When the confirmation message appears, click Yes Setting Up the Printer Driver Then type the IP address or host name Lowing Ports box, and then click Close Click Start, point to Settings, and then click Printers Configuring LPR Port Printing Click Next Click Network printer, and then click Next Click the printer you want to use, and then click Next Configure the protocol Configuring Windows XP Windows 2000, Windows XP or Windows NT print server Configuring the Protocols Configuring a Windows XP computer Internet ConnectionsWith the IP over 1394, click 1394 Connection Using SmartNetMonitor for Client Installing SmartNetMonitor for Client Setting Up the Printer Driver TCP/IP Changing Port Settings Configuring LPR Port Printing Click Next Click the printer you want to use, and then click Next Configuring Windows NT Windows NT 4.0 Configuration Configuring a Windows NT computer Configuring NetBEUI for Printing Type 0 as the Lana Number Using SmartNetMonitor for Client Click Apply From the Print to the following port box, select File Setting Up the Printer Driver IPP Changing Port Settings Configuring LPR Port Printing Click Network printer server and click Next Click the printer you want to use and click OK Printers listed by SmartNetMonitor for Admin Installing the NIB Setup Tool Running the NIB Setup Tool Installing SmartNetMonitor for Admin Quick Setup Using the NIB Setup Tool Wizard Click Wizard and click OKClick IPX protocol Dialog box for configuring the NetWare environment appears After checking the environment, click Next Basic Procedure NetWare 3.x Advanced Settings Setting Up as a Print Server Click Property Sheet and click OKSelect Bindery For type, select Remote Other/Unknown Create a print queue as follows Pconsole Setting Up as a Remote Printer Print Server Operation Mode group, click As Remote Printer Select the printer which is indicated as Not InstalledRemote Printer No. box, type the printer number To start To exitType a new name, if you change the name of the printer Select Remote Parallel, LPT1 for type To use NetWare 5/5.1 NetWare 4.x, 5/5.1 Advanced Settings Click Property Sheet and click OK Click IPX protocol Print Queue volume box, click the Browse button Click TCP/IP protocol Using Pure IP in the NetWare 5/5.1 environment NDS Context box, type the context of the print server Print Server Operation Mode group, click As Print Server Setting Up as a Remote Printer Remote Printer No. box, type the number of the printer Print Queue Volume box, click Browse button To exit Install the printer driver you want to use as Local printer Windows 95/98/MeClick Network and click Browse Select to clear the Form feed and Enable banner check boxes Click the Printer Settings tabWindows Click the PostScript tab Windows NT Changing to EtherTalk Configuring Macintosh Configuring the Printer Changing the Printer NameChanging the Zone Protocol Stack Using SmartNetMonitor for Admin Changing the Network Interface Board Configuration Selecting WizardSelecting Property Sheet Type the password, and then click OK Configuring the Energy Save ModeManaging the User Information From the Tools menu, select User Management Tool Configuring the Network Interface Board with a Web Browser Operating system browser requirementsBrowser Going to the Top Header Buttons Menu ButtonsStatus Configuring the Network Interface Board Settings Password IPP AuthenticationIeee 802.11b Wireless LAN Verifying the Network Interface Board Settings Linking the address URL to the Help button Monitoring and Configuring the Printer Changing Names and CommentsWeb Browser Select Property Sheet, and then click OK Exit SmartNetMonitor for AdminClick the NetBEUI tab Type the computer name into the Computer Name box Change names and comments Type the user name and the password, and then click OK Exit the Web browser Displaying the Status of Printer Monitoring Printers Click Status and you can check the status of the printer Setting Ieee 802.11b Wireless LAN Using the Ieee 802.11b Wireless LAN LAN Type Ieee 802.11b Using in Ad hoc Mode Enter your user name and pass- word, and then click OK Changing to Infrastructure Mode Setting the WEP Key Setting SsidUsing WEP Applying the Settings Make sure the LED of the Ieee 802.11b card is lit Confirming the Connection Using telnet Remote Maintenance by telnet Interface name Interface to be configured Commands ListTCP/IP address Reference Changing the Interface Msh ifconfig interface up Msh access range start-address end-address Access Control Command Information that is displayed Printer statusProtocol System log information Network Interface Board configuration settings information Access type configuration Community name configurationProtocol configuration Access configuration Viewing setting IPP timeout configurationIPP user authorization configuration View settings Configuring the IPP user authorizationSetting timeout Bidirectional configuration for the direct printing port Commands Topics of setting Parameter Settings Setting Ieee 802.11b Ieee 802.11b settings are displayedParameter Value to be configured Key key value Job Spool Job Spool Setting Clearing Spool JobChanging the Host Name AutoNet Address configuration NTP Server Address Configuration Interval ConfigurationTime-zone Configuration Type the current password Changing the passwordType the new password Type the new password once again Supported MIBs Snmp Print Job Information Understanding the Displayed InformationPrint Log Information Item name Meaning Configuring the Network Interface Board 111 Ssid Message Description and Solutions Message ListSystem Log Information 114 115 IPXIP,NDSBINDERY 117 118 Connecting a Dial-Up Router to a Network PrecautionsConfiguring the router Configuring the printer with NetWare PostScript Printing from Windows NetWare Printing Printing after resetting the machineForm Feed Banner Using AutoNet Using Dhcp Configuring a Wins Server Using a WWW browserClick Network Config When Using IPP with SmartNetMonitor for Client When Using the NIB Setup ToolUsing telnet Log out from telnet Snmp Telnet 126 Copyright Network Printing Guide PostScript Page Using PostScript Page Setting up Options Job TypeNormal Select Sample Print in Job Type Click Details How to Use Sample Print Select Sample Print in Print Job After making all of the settings you want, click Print Select Locked Print in Job Type Click Details How to Use Locked Print Digits Select Locked Print in Print Job Duplex Printing CollateWindows 95/98/Me Off Open to Left Paper Selection Paper Size Media TypePaper source Resolution Destination TrayToner Saver Duplex Unit User Code Hard Disk MailboxUpper Tray Using PostScript Start the Macintosh Insert the CD-ROM into the CD-ROM drive Installing Printer Utility for Mac Double-click the icon of Printer Utility for Mac Starting Printer Utility for Mac Printer Utility for Mac Functions File menuUtility menu Click Cancel Downloading PS FontsClick Download Deleting Fonts Displaying Printers Fonts Setup Initializing the Printer DiskPrinting Font Catalog Renaming the Printer Printing Font SampleSelect Print Fonts Sample... on the File menu Select Rename Printer... on the File menu Restarting the Printer Downloading PostScript FilesSelecting the Zone Launching the Dialogue Console Displaying the Printer StatusClose Chooser Select Display Printer Status... on the Utility menu Printer Utility for Mac Printer Utility for Mac Page Unix Supplement Page Manuals for This Printer How to Read This Manual Printing Method Using the Installation Shell ScriptPage Assigning the IP Address Using the Installation Shell Script Confirming the IP address Executing the Installation Shell ScriptAEnter the following ALog on to the workstation as root Type the following to get the installation shell script CRun the installation shell scriptClose the ftp session IMake a test print to confirm that the settings are correct Configure the printer nameEEnter the IP address of the printer FEnter the host name of the printer Deleting the printer BSD Unix workstation, LinuxSolaris, HP-UX Mx#0 Adding an entry to the /etc/printcap file Making the log file Making the spool directory Registering the printer # lpadmin -p np -s nphost!option -T dump -I any Restart the scheduler Printing Method Printing with lpr, lpBSD Unix workstation Rsh Printing with rsh, rcp, ftpRcp To specify the file and print it To print all of the files in a directory Ftp To print one fileTo print several files Viewing the Printer Status with lpq and lpstat Printer StatusViewing the Printer Status with rsh and ftp System V UNIX, Soralis, HP-UX Parameter Information returned Reference Copying Information to a File Unix UE USA G056 Copyright Unix Supplement Quick Installation GUIDEG074-8627 Network connection Parallel connectionUSB connection