Manuals / Ricoh / Computer Equipment / Printer

Ricoh AP2610N setup guide Resetting the Ieee 802.11b Wireless LAN Settings, 122

Models: AP2610N

1 472

Download 472 pages 11.21 Kb

Page 224

Making Printer Settings with the Control Panel

G Press {On Line}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

“Ready” appears on the panel display.

				Ready


			Resetting the IEEE 802.11b (Wireless LAN) Settings

			If you need to reset the wireless LAN setting, select "WL.LAN Defaults" in the
	6
	6		Maintenance menu.

Note

❒The four items that can be reset in "IEEE 802.11b" of the Host Interface menu are "Comm.Mode", "Channel", "Trans. Speed", and "WEP Settings". Other items that can be reset are the SSID settings, the WEP key settings, and the wireless LAN settings that can be made with telnet.

A Press {Menu}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

“Menu” appears on the panel display.

B Press {T} or {U} to display the “Maintenance” menu.

Menu:

Maintenance

122

Image 224

Ricoh AP2610N setup guide Resetting the Ieee 802.11b Wireless LAN Settings, 122

Contents

Setup Guide Means Power ON. b means Power OFF Setup Guide Page Trademarks Safety Information Safety During OperationPositions of Labels and Hallmarks for Rwarning and Rcaution IiiPage Specifications Energy Saver modeEnergy Star Program Recycled PaperManuals for This Printer Manuals for This PrinterVii How to Read This ManualSymbols Table of Contents Installing the Rpcs Printer Driver Installing the PostScript Printer DriverInstalling the Printer Driver Using USB Installing the Printer Driver Using IeeePage Features of This Printer Major SpecificationsTime Saving Compact BodyRpcs printer driver Printer Drivers for This PrinterPCL printer drivers Adobe PostScript Printer Drivers and PPD files SmartNetMonitor for Admin Software and Utilities Included on the CDAgfa Monotype Font Manager SmartNetMonitor for ClientViewing the Contents of the CD-ROM Exterior Guide to This PrinterMainframe Front Cover Release Button Power Cord Power SwitchOutput Tray Standard Tray Upper CoverInterior Job Reset key Control PanelForm Feed key Menu keyEscape key Enter # keyInstalling Options Option ListEnvelope Feeder Type Available OptionsPaper Feed Unit Type 2600 Tray 2 or Tray Basic model Printer Interior 802.11b Interface Unit Type a Memory Unit TypeB 64MB Network standard model Printer InteriorMemory Unit TypeB 64MB Hard Disk Drive Type Paper Feed Unit Type Attach the interface cable to the printerReference Envelope Feeder Type Memory Unit TypeB 64MB Use a coin to remove the two screwsPull out the handle of the control- ler board Pull the handle and slide the con- troller board outIf the Duplex Unit is not at- tached, go to step N Installing Options Installing the Network Interface Board Network Interface Board TypeFasten the Network Interface Board to the controller board If the Duplex Unit is not at- tached, go to step O Connecting the Network Interface Cable to the Network Turn off the power switch Loop the network interface cableInstalling the 1394 Interface Unit Interface Unit TypeAttach the 1394 Interface Unit to the controller board Fasten the 1394 Interface Unit to the controller board Connecting the 1394 Interface Power supplyRequired cable Bus802.11b Interface Unit Type a Attach the 802.11b Interface Unit Ing the Configuration Fasten the Hard Disk Drive HDD Error Initialize ?Hard Disk Drive Type HDD Initialize Finish OK ReadyPress Enter # to format the Hard Disk Drive Press On LineAD410 Duplex Unit Remove the rear cover in the hor- izontal directionAfter installing the last option that Bin Shift Sort Tray Type Remove the upper cover of the printerSlide the upper tray into the 1-bin Shift Sort Tray CS380 Mailbox CS380 Mailbox Installing Options Ethernet Configuration Setting Name ValueHost Interface Network Setup Network Setup IP AddressNetwork Setup Active Protocol Menu Host InterfaceNetwork Setup Network Boot Network Boot *NonePress U or T to display Network Boot IP Address 192.02k.033.044Network Setup Frame Type NW Network Setup LAN TypeFrame Type NW *Auto LAN Type *EthernetIeee 1394 Configuration Host Interface Ieee 1394 SetupIeee 1394 Setup IP Address1394 Ieee 1394 Setup IP overScsi print *Active Ieee 1394 Setup Scsi printIP Address1394 192.02k.033.044 Ready Ieee 802.11b Wireless LAN Configuration Ieee 802.11b Comm. ModeHost Interface Ieee 802.11b Press U or T to display Ieee 802.11bIeee 802.11b Channel AddressSubnet Mask Gateway AddressConfiguring the Printer for the Network Installation Method ConnectionQuick Install Select Quick InstallClick Install Follow the instructions on the screenSelect PCL/RPCS Printer Drivers Installing the PCL 6/5e Printer DriverInstalling the PCL 6/5e Printer Driver Setting Up Options Installing the Rpcs Printer Driver Installing the Rpcs Printer DriverInstalling the Rpcs Printer Driver Installing the PostScript Printer Driver Windows 95/98/Me Installing the PostScript Printer DriverInstalling the printer driver Click Next Check Local Printer and then click NextSetting up options Select PostScript 3 Printer Driver Add Printer Wizard startsClick the Device Settings tab Windows NT 4.0 Installing the PostScript Printer Driver When connecting with a parallel cable Bidirectional transmissionWhen connecting with USB When connecting with the networkWhen connecting with Ieee Macintosh Installing the PostScript 3 Printer Driver Setting up the PPD fileClick Configure Close the Chooser dialog boxInstalling the Printer Driver Using USB Windows 98/Me Installing the Printer Driver Using USBCheck Specify a location, and then click Browse Click FinishMacintosh-Creating a Desktop Printer icon Click Change in USB Printer SelectionClick Create Enter the printer name, and then click SaveInstalling the Printer Driver Using Ieee Printing with Scsi PrintClick Browse Click Open Click OKWindows XP Printing with IP over Inactivating the DeviceFound New Hardware Wizard dialog box, and then click Next Installing the SmartNetMonitor for Client/Admin Select SmartNetMonitor for Client/AdminInstalling the Agfa Monotype Font Manager Select Agfa Monotype Font ManagerUsing Adobe PageMaker Version 6.0 or Index Rpcs UE USA G074 Means Power ON. b means Power OFF UE USA G074-8637 Printer Reference Page Trademarks Setup Guide Printer Reference this manualHow to Read This Manual Table of Contents Error & Status Messages on the Control Panel Maintenance Menu 114Sample Print Locked PrintReplacing Parts 143 Specifications 157Consumables 164 Information about Installed Software 165 System Menu 124PCL 6/5e Accessing the Printer Properties Windows 95/98/Me Accessing the Printer PropertiesChanging the default printer settings Making printer settings from an applicationWindows 2000/Windows XP Accessing the Printer Properties Changing the default printer settings Printer PropertiesSelect the printer you want to use in the Select Printer box Click Print to start printingWindows NT 4.0 Accessing the Printer Properties On the File menu, click Document DefaultsClick OK to start printing Rpcs Accessing the Printer Properties On the File menu, click Printing Preferences Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application PostScript Setting Up for Printing Make any settings you require and click Apply Click OKPrinting Preferences Properties appears Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application Macintosh Setting Up for Printing Making paper settings from an applicationSetting up for printing from an application On the File menu, click Page SetupCanceling a Print Job Select the name of the job you want to cancelOn the Document menu, click Cancel Printing Press Job Reset on the control panelMacintosh Canceling a Print Job Double-click the printers icon on the desktopClick Yes to uninstall the printer driver Uninstalling the PCL 6/5e Printer DriverWindows 95/98/Me Uninstalling the PCL 6/5e Printer Driver Windows NT 4.0 Uninstalling the PCL 6/5e Printer Driver Uninstalling the Rpcs Printer Driver Windows 95/98/Me Uninstalling the Rpcs Printer DriverWindows NT 4.0 Uninstalling the Rpcs Printer Driver Close all applications that are currently runningUninstalling the PostScript Printer Driver Windows 95/98/Me Uninstalling the PostScript Printer DriverWindows NT 4.0 Uninstalling the PostScript Printer Driver Macintosh Uninstalling the PostScript Printer DriverThis manual On the panel display Paper feed direction Paper and Other Media Supported by This PrinterPaper Types and Sizes Input Paper Sizes Metric version MmSizeInput Paper Sizes Inch version 10.12 ⋅ Paper weight and number of sheets to be set Supported paper weight Maximum number Sheets plain paper *1Output Paper Sizes Metric version Output Paper Sizes Inch version 16K 68 ⋅ 101/2 101/2 ⋅ Paper Recommendations Loading PaperStoring Paper Types of Paper and Other Media Plain paperOHP transparencies Adhesive labelsEnvelopes Metric version Inch versionPaper not supported by this printer Printable Area Load paper into the tray with the print side down Loading Paper and Other MediaLoading Paper in the Paper Tray Changing the paper size Slide the catches inwards to unlock the traySlide the tray until it stops Return the catches to their orig- inal positionsOpen the Bypass Tray Adjust the side guides to the pa- per widthLoading Paper in the Bypass Tray Menu Paper Input Paper Input Bypass SizeBypass Size *11 x Bypass Size 2 xBypass Size Custom Size Custom Size HorizCustom Size Vert Menu Paper Input ReadySetting the Bypass Tray Paper Type Paper Input Paper TypePaper Type Bypass Tray Bypass Tray Thick PaperLoading Paper in the Optional Paper Tray Load paper into the paper tray with the print side down Loading EnvelopesLoading envelopes onto the Bypass Tray Slide the side guides against the edge of the envelope stack Press U or T to display Paper Input menuLoading envelopes into the Envelope Feeder Unit Press U or T to select the envelope type you want to usePush the bottom plate down until it locks into place Paper Input Tray Paper Size Tray Paper Size TrayPress U or T to display Tray Paper Size Press U or T to display TrayReady message appears on the control panel Printing a Sample Print File From an application, select the menu command to printSample Print Sample Print 0856 ABCD1234 Select Action Print FileMenu Sample Print Qty Press # to PrintDeleting a Sample Print File ProcessingABCD1234 Press# to Delete DeletedChecking the Error Log Sample Print Error FilesError Files 0652 ABCD1234 Press T or U to display Error FilesReady Password box, type a pass- word of four digits Click OK After making all desired settings, click OKLocked Print Printing a Locked Print FilePassword Password *2Invalid Password Try Again Menu Locked PrintABCD1234 Press # to Print Press T or U to display the Locked Print menuSelect Action Delete File Press T or U to display De- lete FileLocked Print Error Files Error & Status Messages on the Control Panel Messages/Second messages Description SolutionTroubleshooting See 1394 Interface Unit Type NV-RAM Error & Status Messages on the Control Panel Enter # Messages/Second messages Description Solution Messages/Second messages Description Solution Getting Printer Information over the Network Printer current statusTelnet Messages Description CommentsMessages Description Comments Messages Description Comments Messages Description Comments Name Description Printer configurationInput Tray Name Input Tray Paper Size Paper Size DescriptionInput Tray Status Output Tray NameOutput Tray Status Status DescriptionPossible Cause Solutions Printer Does Not PrintTerface cable Network ConnectionERS\ UTILITY\1394\ Other Printing Problems Status Possible Causes, Descriptions, and SolutionsOn from the Maintenance menu Other Printing Problems When Remove Misfeed Paper Tray Appears Removing Misfed PaperWhen Remove Misfeed Internal Path/Open Front Cover Appears When Remove Misfeed Paper Exit Cover Appears Close the front coverOpen the paper exit cover Remove the misfed paperClose the paper exit cover until it clicks Remove the rear cover in a hor Izontal directionClose the rear cover Insert the fusing unit until it stopsWhile holding the tab, remove the misfed paper When Remove Misfeed Duplex Unit Appears Close the rear cover of the Du- plex UnitClose the cover of the Duplex Unit Pull the Duplex Unit outPrinter until it stops, and remove Misfed paperOpen the cover of the Mailbox Close the cover of the MailboxOpen the upper tray cover Close the upper tray coverReplacing the Toner Cartridge Be sure to put the toner cartridge on a stable, flat surface ZGDH130J Cleaning and Adjusting the Printer Cleaning the Friction PadCleaning the Paper Feed Roller Move the printer to the edge of a stable table or deskZGDM120J Cleaning the Registration Roller Adjusting the Image Density Maintenance Image DensityAdjusting the Registration of the Trays Press U or T to set the image density valueAdjustment Horiz. Tray Registration Prt. Test SheetPrt. Test Sheet Tray Printing100 Press U or T to set the dig- it of the registration value mmCategory Function menu Menu Chart101 102 103 Accessing the Main Menu 104105 Paper Input Menu Paper Input ParametersTray 106Tray 1, Tray 2, Tray 107Changing the Paper Input Menu Paper Input Tray PriorityTray Priority *Tray 108109 Printing a Configuration List/Test Print MenuList/Test Print Parameters 110List/Test Print Config. Menu List/Test Print111 Press T or U to display the List/Test Print menuInterpreting the Configuration Maintenance Error LogPaper Input SystemMaintenance Menu 114Maintenance Menu Parameters AdjustmentPrt. Test Sheet 115116 Changing the Maintenance Menu Maintenance Menu ProtectMenu Protect *Off Protecting the menusCanceling the protection 118Menu Maintenance Maintenance HDD FormatHDD Format Press# to Start Completed Restart PrinterMaintenance WL.LAN Signal Displaying the Signal StrengthPress T or U to display the Maintenance menu Press T or U to display WL.LAN SignalPress Escape WL.LAN Signal Good 100% Fair 50% Poor 30% Unavailable 18%121 Resetting the Ieee 802.11b Wireless LAN Settings 122Maintenance WL.LAN Defaults WL.LAN Defaults Reset-Defaults?Defaults reset Press T or U to display WL.LAN DefaultsSystem Menu 124125 126 Tiff 127System MisfeedRecovery Changing the System MenuMenu System System Energy SaverEnergy Saver Saver Timer Press U or T to display E. Saver TimerEnergy Saver Saver On/Off Energy Saver *30 minutes130 Host Interface MenuHost Interface Parameters 131 Menu Description Network SetupIP Address Network Boot Frame Type NWActive Protocol EthernetIP Address1394 Subnet Mask1394IP over Scsi printWEP Settings Comm.ModeChannel Trans. SpeedHost Interface Timeout Press U or T to display I/O TimeoutChanging the Host Interface Menu 135Timeout *15 seconds 136137 PCL MenuPCL Parameters 138 Changing the PCL Menu PCL Menu OrientationOrientation Portrait 139140 Language Menu Changing the Language MenuMenu Language 141Language English 142Replacing Parts 143Maintenance KIT Type Checking the contents of the boxCheck the contents of the box for the following items Replacing the Friction PadPreparing to replace the parts 145Replacing the Paper Feed Rollers Insert the new friction pad in the paper trayReplacing the Transfer Roller 147148 Remove the rear cover in a hor- izontal direction Replacing the Fusing Unit149 150 Pull the fusing unit outReplace the new fusing unit into the printer Collate and Shift Collate CollateShift Collate 151152 Spool PrintingConfirm or delete the spooled job from a Web browser 153 Setting of the Frame PriorityMemory Capacity and Paper Size Setting of the Font Priority 154Moving and Transporting the Printer Moving the PrinterMoving the printer in the short distance 155Removing the Duplex Unit 156Specifications Paper Weight Power SourcePower Consumption Dimensions *1Warm-up Time Paper CapacityPaper Output Capacity MemoryPaper Feed Unit Type Dimensions W⋅D⋅H Envelope Feeder Type Dimensions W⋅D⋅HAD410 Duplex Unit Dimensions W⋅D⋅H OptionsBin Shift Sort Tray Type Dimensions W ⋅ D ⋅ H CS380 Mailbox Dimensions W ⋅ D ⋅ HStack Capacity Hard Disk Drive Type Storage Capacity FormattedNumber of Pins Interface ConnectorMemory Unit TypeB 64MB Module Type Memory TypeTransmission Mode 802.11b Interface Unit TypeA R-WL11 Transmission SpecProtocol Data Transfer SpeedMaintenance Kit ConsumablesToner Cartridge 164165 Information about Installed SoftwareExpat NetBSD 166Authors Name List 167168 169 170 Copyright UE USA G073-8617 Network Printing Guide Page Manuals for This Machine How to Read This Manual Features Interface supported protocols Setting Up the Machine on a Network Windows 95/98/Me, Windows 2000/Windows XP, Windows NTConfiguring the machine as a print server NetWareConfiguring the machine as a remote printer MacintoshPrinting using the Ieee 802.11b Interface Ad hoc modeInfrastructure mode Printing using the Ieee 1394 Interface Configuring Windows 95/98/Me Configuring ProtocolsUsing SmartNetMonitor for Client Setting Up a Client ComputerConfiguring Windows NT Installing the NIB Setup ToolNetWare 4.x, 5/5.1 Advanced Settings Configuring MacintoshUsing SmartNetMonitor for Admin Monitoring and Configuring the PrinterUsing the Ieee 802.11b Wireless LAN Remote Maintenance by telnetXiv Printing with a Windows 2000 or Windows NT Print Server Configuring Windows 95/98/MePrinting without a Print Server Configuring Protocols Configuring TCP/IP and IPP for PrintingConfiguring the machine Command PromptConfiguration tab Configuring NetBEUI for PrintingConfiguring a Windows 95/98/Me computer Configuring a Windows 95/98/Me computer Using SmartNetMonitor for Client SmartNetMonitor for Client featuresInstalling SmartNetMonitor for Client Uninstalling SmartNetMonitor for ClientDeleting the port Click OK to close the printer propertiesClick the printer you want to use, and then click OK Setting Up the Printer DriverSelect the printer Click NetBEUI Click IPPChanging Port Settings Setting Up a Client Computer Install the printer driver as a local printerPrinters connected to the network are displayed Windows 95/98/Me Configuration Configuring Windows Printing with a Standard TCP/IP PortPrinting with a LPR Port Configuring the Protocols Configuring a Windows 2000 computerConfiguring NetBEUI for Printing Using SmartNetMonitor for Client When the confirmation message appears, click Yes Click Close to close the Printer PropertiesSetting Up the Printer Driver Then type the IP address or host name Lowing Ports box, and then click Close Configuring LPR Port Printing Click Start, point to Settings, and then click PrintersClick Next Click Network printer, and then click Next Click the printer you want to use, and then click Next Configuring Windows XP Configure the protocolWindows 2000, Windows XP or Windows NT print server Configuring the Protocols With the IP over 1394, click 1394 Connection Configuring a Windows XP computerInternet Connections Using SmartNetMonitor for Client Installing SmartNetMonitor for Client Setting Up the Printer Driver TCP/IP Changing Port Settings Configuring LPR Port Printing Click Next Click the printer you want to use, and then click Next Windows NT 4.0 Configuration Configuring Windows NTConfiguring a Windows NT computer Configuring NetBEUI for Printing Type 0 as the Lana Number Using SmartNetMonitor for Client From the Print to the following port box, select File Click ApplySetting Up the Printer Driver IPP Changing Port Settings Configuring LPR Port Printing Click Network printer server and click Next Click the printer you want to use and click OK Installing the NIB Setup Tool Printers listed by SmartNetMonitor for AdminInstalling SmartNetMonitor for Admin Running the NIB Setup ToolClick IPX protocol Quick Setup Using the NIB Setup Tool WizardClick Wizard and click OK Dialog box for configuring the NetWare environment appears After checking the environment, click Next NetWare 3.x Advanced Settings Basic ProcedureSelect Bindery Setting Up as a Print ServerClick Property Sheet and click OK Create a print queue as follows For type, select Remote Other/UnknownSetting Up as a Remote Printer PconsoleRemote Printer No. box, type the printer number Print Server Operation Mode group, click As Remote PrinterSelect the printer which is indicated as Not Installed To exit To startType a new name, if you change the name of the printer Select Remote Parallel, LPT1 for typeNetWare 4.x, 5/5.1 Advanced Settings To use NetWare 5/5.1Click Property Sheet and click OK Click IPX protocol Print Queue volume box, click the Browse button Using Pure IP in the NetWare 5/5.1 environment Click TCP/IP protocolPrint Server Operation Mode group, click As Print Server NDS Context box, type the context of the print serverSetting Up as a Remote Printer Print Queue Volume box, click Browse button Remote Printer No. box, type the number of the printerTo exit Click Network and click Browse Install the printer driver you want to use as Local printerWindows 95/98/Me Click the Printer Settings tab Select to clear the Form feed and Enable banner check boxesWindows Click the PostScript tabWindows NT Configuring Macintosh Changing to EtherTalkChanging the Zone Configuring the PrinterChanging the Printer Name Using SmartNetMonitor for Admin Protocol StackSelecting Property Sheet Changing the Network Interface Board ConfigurationSelecting Wizard Configuring the Energy Save Mode Type the password, and then click OKManaging the User Information From the Tools menu, select User Management ToolBrowser Configuring the Network Interface Board with a Web BrowserOperating system browser requirements Status Going to the TopHeader Buttons Menu Buttons Configuring the Network Interface Board Settings IPP Authentication PasswordIeee 802.11b Wireless LAN Verifying the Network Interface Board SettingsLinking the address URL to the Help button Web Browser Monitoring and Configuring the PrinterChanging Names and Comments Exit SmartNetMonitor for Admin Select Property Sheet, and then click OKClick the NetBEUI tab Type the computer name into the Computer Name boxType the user name and the password, and then click OK Change names and commentsDisplaying the Status of Printer Exit the Web browserMonitoring Printers Click Status and you can check the status of the printer Using the Ieee 802.11b Wireless LAN Setting Ieee 802.11b Wireless LANUsing in Ad hoc Mode LAN Type Ieee 802.11bChanging to Infrastructure Mode Enter your user name and pass- word, and then click OKSetting Ssid Setting the WEP KeyUsing WEP Applying the SettingsConfirming the Connection Make sure the LED of the Ieee 802.11b card is litRemote Maintenance by telnet Using telnetCommands List Interface name Interface to be configuredTCP/IP address ReferenceMsh ifconfig interface up Changing the InterfaceAccess Control Msh access range start-address end-addressProtocol Command Information that is displayedPrinter status Network Interface Board configuration settings information System log informationCommunity name configuration Access type configurationProtocol configuration Access configurationIPP user authorization configuration Viewing settingIPP timeout configuration Configuring the IPP user authorization View settingsSetting timeout Bidirectional configuration for the direct printing portParameter Settings Commands Topics of settingParameter Value to be configured Setting Ieee 802.11bIeee 802.11b settings are displayed Job Spool Key key valueChanging the Host Name Job Spool SettingClearing Spool Job Address configuration AutoNetTime-zone Configuration NTP Server Address ConfigurationInterval Configuration Changing the password Type the current passwordType the new password Type the new password once againSnmp Supported MIBsUnderstanding the Displayed Information Print Job InformationPrint Log Information Item name MeaningConfiguring the Network Interface Board 111 Ssid System Log Information Message Description and SolutionsMessage List 114 115 IPXIP,NDSBINDERY 117 118 Precautions Connecting a Dial-Up Router to a NetworkConfiguring the router Configuring the printer with NetWarePrinting after resetting the machine PostScript Printing from Windows NetWare PrintingForm Feed BannerUsing Dhcp Using AutoNetClick Network Config Configuring a Wins ServerUsing a WWW browser When Using the NIB Setup Tool When Using IPP with SmartNetMonitor for ClientUsing telnet Log out from telnetSnmp Telnet 126 Copyright Network Printing Guide PostScript Page Using PostScript Page Normal Setting up OptionsJob Type How to Use Sample Print Select Sample Print in Job Type Click DetailsAfter making all of the settings you want, click Print Select Sample Print in Print JobHow to Use Locked Print Select Locked Print in Job Type Click DetailsSelect Locked Print in Print Job DigitsCollate Duplex PrintingWindows 95/98/Me Off Open to LeftPaper Selection Paper source Paper SizeMedia Type Toner Saver ResolutionDestination Tray User Code Duplex UnitUpper Tray Hard DiskMailbox Using PostScript Installing Printer Utility for Mac Start the Macintosh Insert the CD-ROM into the CD-ROM driveStarting Printer Utility for Mac Double-click the icon of Printer Utility for MacUtility menu Printer Utility for Mac FunctionsFile menu Click Download Click CancelDownloading PS Fonts Displaying Printers Fonts Deleting FontsPrinting Font Catalog SetupInitializing the Printer Disk Printing Font Sample Renaming the PrinterSelect Print Fonts Sample... on the File menu Select Rename Printer... on the File menuSelecting the Zone Restarting the PrinterDownloading PostScript Files Displaying the Printer Status Launching the Dialogue ConsoleClose Chooser Select Display Printer Status... on the Utility menuPrinter Utility for Mac Printer Utility for Mac Page Unix Supplement Page Manuals for This Printer How to Read This Manual Using the Installation Shell Script Printing MethodPage Using the Installation Shell Script Assigning the IP AddressExecuting the Installation Shell Script Confirming the IP addressAEnter the following ALog on to the workstation as rootClose the ftp session Type the following to get the installation shell scriptCRun the installation shell script Configure the printer name IMake a test print to confirm that the settings are correctEEnter the IP address of the printer FEnter the host name of the printerSolaris, HP-UX Deleting the printerBSD Unix workstation, Linux Adding an entry to the /etc/printcap file Mx#0Making the spool directory Making the log file# lpadmin -p np -s nphost!option -T dump -I any Registering the printerRestart the scheduler BSD Unix workstation Printing MethodPrinting with lpr, lp Printing with rsh, rcp, ftp RshRcp To specify the file and print it To print all of the files in a directoryTo print several files FtpTo print one file Printer Status Viewing the Printer Status with lpq and lpstatViewing the Printer Status with rsh and ftp System V UNIX, Soralis, HP-UXCopying Information to a File Parameter Information returned ReferenceUnix UE USA G056 Copyright Unix Supplement Quick Installation GUIDEG074-8627 USB connection Network connectionParallel connection