Wireless Analog Adjunct Connection

W-8

 

 

W-8 Wireless Analog Adjunct Connection

General Description

This feature allows the existing PBX (no wireless function) to operate a PS as well as a station in the office. Each PS is connected with the dedicated COT in the Built-in Wireless system. When a call is originated from the PS, it terminates to the LC in the existing PBX via the corresponding COT and is handled by the existing PBX.

C.O.

Line

TIE

Line

Station

Existing PBX (no wireless function)

COT

STN-A

 

ODT

STN-B

LC

LC

LC

COT

COT

Built-in Wireless System

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ZT

 

CSINT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PS-A

PS-B

Operating Procedure

No manual operation is required.

Service Conditions

1.Only DTMF signals can be sent to the existing PBX.

2.Only one COT circuit card must be assigned for one PS.

3.

When an incoming call terminates from the existing PBX to a PS via the LC COT, if the terminating

 

PS is busy or out of zone, call termination is performed again.

Note:

The calling party hears Ringback Tone without condition. While Ringback Tone is sent, the Built-in Wireless

 

System attempts the call termination to the called PS periodically and ring the PS when the PS becomes

 

available.

4.The distinctive ringing service is not provided when a call terminates to the PS.

5.When the Speed Calling - System/Station service is activated using Overlap Dialing including the access code, the number dialed may not be stored for redialing.

6.Whether or not Call Forwarding services (Call Forwarding - All Calls/Busy Line/Don’t Answer) by the access code are available depends on the system data of the existing PBX. The Call Forwarding service set by access code is activated only when the call terminates to the corresponding LC in the existing PBX.

7.The CALL FORWARDING PS INCOMING CALL INCOMPLETE [C-155] service cannot be set to a PS.

8.When a call terminates from the existing PBX to the PS out of zone, the AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE [A-129] service cannot be activated. (The calling party continues to hear Ringback Tone.)

9.When the PS engaged in a connection via the existing PBX moves Out of Zone, the AUTOMATIC ANNOUNCEMNET - DISCONNECTED PS OUT OF ZONE [A-128] service is not provided. (The calling party hears Reorder Tone.)

10.This feature is not available in the FCCS network.

NEAX2400 IPX Wireless Features and Specifications

Page 53

NDA-24313, Issue 1

Page 58
Image 58
NEC specifications Wireless Analog Adjunct Connection, Available