A-128

Automatic Announcement - Disconnected PS Out Of Zone

 

 

A-128 Automatic Announcement - Disconnected PS

Out Of Zone

General Description

When a talking Dterm PS series user moves Out of Zone, that is, the Wireless service area, to have the progressing

call disconnected, the counterpart hears the announcement that the talks are disconnected due to the talking party moving Out of Zone. This also can apply when the power of either Dterm PS is OFF.

Operating Procedure

No manual operation is required.

Service Conditions

1.This service is valid only in a two-party call. This service cannot be used when a call is placed on hold or conference calling participated in by three-party or more is in progress.

2.DAT (Digital Announcement Trunk) circuit card can be used as an announcement trunk.

3.AUTOMATIC ANNOUNCMENT - DISCONNECTED PS OUT OF ZONE is not applied to the cases where calls are in progress via a COT line or Attendant Console. A C.O. line subscriber hears Reorder Tone and a caller via the Attendant Console encounters Busy Tone.

4.In a FCCS network, every node must have one or more announcement trunk(s).

Page 44

NEAX2400 IPX Wireless Features and Specifications

NDA-24313, Issue 1

Page 49
Image 49
NEC specifications Automatic Announcement Disconnected PS Out Of Zone