NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1 Page 45
Automatic Announcement - Called PS Out of Zone A-129
A-129 Automatic Announcement - Called PSOut of ZoneC-155 Call Forwarding PS Incoming Call Incomplete
General Description
When a call cannot be terminated due to the called D term PS series which is Out of ZT or whose power is OFF, the
system automatically answers the call and provides an announce ment to noti fy the cal ling party tha t th e called D term
PS is Out of Zone or if the CALL FORWARDING PS INCOMING CALL INCOMPLETE is set to a given
destination, the aborted call can be transferred to the pre programmed station or Dterm PS.
Operating Procedure
No manual operation is required.
Service Conditions
1. CALL FORWARDING PS INCOMING CALL INCOMPLETE can be programmed and cancelled by the
Dterm PS with pressing Access Code + transferred telephone number. Note
2. In the case where the Dter m PS is Out of Zone, or its power is OFF, and the call is an incoming call from
the Central Office directly or the Central Office call via the Attendant Console, the caller does not hear
AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE, and hears the following tones.
• DIT: Ringback Tone is heard
• REMOTE ACCESS TO SYSTEM: Busy Tone is heard
• AUTOMATED ATTENDANT: Busy Tone is heard
• ATTENDANT CONSOLE: Busy Tone is heard
• ISDN - DID ADDRESSING: Announcement of ISDN (PSTN) is heard.
3. One system is given one kind of recorded message for AUTOMATIC ANNOUNCEMENT - CALLED
PS OUT OF ZONE.
4. On the condition that both AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE and
CALL FORWARDING PS INCOMING CALL INCOMPLETE are assigned to a Dterm PS, priority is
given to CALL FORWARDING PS INCOMING CALL INCOMPLETE.
5. If an incoming call terminated at the very mom ent when a Dterm PS series user is setting CALL
FORWARDING PS INCOMING CALL INCOMPLETE with a Pre-Set Dialing (before OFF-HOOK), the
procedure so far becomes invalid.
6. If the another transfer service is set to the target destination party of CALL FORWARDING PS
INCOMING CALL INCOMPLETE, the call is transferred to the last end party.
7. When a call is transferred to another Dterm PS activated by CALL FORWARDING PS INCOMING
CALL INCOMPLETE and when the call termination is not completed, the call can be transferred to
another destination party if the CALL FORWARDING PS INCOMING CALL INCOMPLETE is set. If
the AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE is assigned, the caller hears the
announcement. When both CALL FORWARDING PS INCOMING CALL INCOMPLETE and
AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE are not programmed, the caller hears
Busy Tone.
8. AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE does not allow the incoming call
from outside to be connected to announcement trunk. The calling party hears Ringback Tone.