| Call Forwarding - Dropped Calls | |
|
|
|
| Call Forwarding - Dropped Calls |
|
General Description
This feature provides a call forwarding function when a PS encounters a Squelch Disconnection (such as PS moving out of zone, failing to hand over a call, or a sudden power down of the PS) during a
Note: This feature is available when CALL FORWARDING PS INCOMING CALL INCOMPLETE is already assigned to the PS.
Operating Procedure
To set up this feature
1.
a.) Dial the access code to set this feature.
b.) Go
2.Overlap Dialing
a.) Go
d.) Go
To cancel this feature Note 1
1.
a.) Dial the access code to cancel this feature.
b.) Go
2.Overlap Dialing
a.) Go
b.) Dial the access code to cancel this feature. c.) Hear the Service Set Tone.
d.) Go
Note 1: This feature also can be cancelled by cancelling CALL FORWARDING PS INCOMING CALL INCOMPLETE. (Refer to Item 3 under Service Conditions.)
Note 2: When dialing the cancel access code, which this feature has not be assigned, Reorder Tone is returned.
Service Conditions
1.This feature can be set at each PS, which is already provided with the CALL FORWARDING PS INCOMING CALL INCOMPLETE feature.
2.The forwarding destination of CALL FORWARDING PS INCOMING CALL INCOMPLETE is also designated as the destination of this feature.
3.This feature also can be cancelled by cancelling CALL FORWARDING PS INCOMING CALL INCOMPLETE. However, CALL FORWARDING PS INCOMING CALL INCOMPLETE is solely cancelled while this feature is maintained, depending on the system data.
4.After this feature is once in service, the function of this feature is still maintained, even if CALL FORWARDING PS INCOMING CALL INCOMPLETE service is restricted.
NEAX2400 IPX Wireless Features and Specifications | Page 57 |
|